| Axilat™ DF 6352 DD | Powder | Defoamer in powder form, for cement modofication, grouts and underlayments; long lasting effect; APEO-free |
| Axilat™ DF 770 DD | Powder | Defoamer in powder form, for cement modofication, grouts and underlayments; fast effect. |
| Axilat™ DF 775 DD | Powder | Defoamer in powder form, for cement modofication, grouts and underlayments; fast effect. |
| Axilat™ HP 8510 | Powder | Vinyl acetate, vinyl versatate copolymer resin in redispersible powder form, improves adhesion properties and abrasion resistance. Used in dry mortars. |
| Axilat™ HP 8513 | Powder | Vinyl acetate, vinyl versatate copolymer resin in redispersible powder form, used in dry mortars to improve workability of fresh mortar, adhesion and mechanical properties (flexibility, abrasion resistance and cohesive strength).Suitable for self-Leveling underlayment (SLU), ceramic tile adhesives, mortars and gypsum-based compound applications. |
| Axilat™ HP 8520 | | Vinyl acetate, vinyl versatate copolymer resin in redispersible powder form, used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates and mechanical properties (flexibility, abrasion resistance and cohesive strength). Highly versatile resin with high redispersibility in water. For self-Leveling underlayment (SLU), tile adhesives, mortars and gypsum joint compounds and renders. |
| Axilat™ HP 8530 | Powder | Hydrophobic vinyl acetate/vinyl versatate copolymer resin in redispersible powder form, used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates and mechanical properties (flexibility, abrasion resistance and cohesive strength). Highly versatile resin with high redispersibility in water. For self-Leveling underlayment (SLU), tile adhesives, mortars, external insulating finishing systems (EIFS) and gypsum joint compounds and renders. |
| Axilat™ HP 8538 | Powder | Vinyl acetate, redispersible-in-water powder, used in dry mortars to improve adhesion to conventional substrates (especially to polystyrene foam slabs), hydrophobic and mechanical properties and workability of fresh mortar. |
| Axilat™ PAV 30 | Powder | Vinyl acetate, vinyl versatate copolymer resin in redispersible powder form, used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates and mechanical properties, suitable for high performance tile adhesive mortar (e.g. C2 type according to EN 12004), cement based tileadhesive, self-leveling floor compound, and gypsum-based compound (adhesives, skim coatings, screeds, joints) applications. |
| Axilat™ PSB 150 | Powder | Styrol butandien copolymer resin, redispersible-in-water powder form, fine particle size and high binding power, which gives enhanced adhesion properties. Highly recommended for gypsum based application, also recommended for tile adhesive mortars, low reactivity cement-based Systems, facade renders, repair mortars, wallpaper glues. |
| Axilat™ RH 200 XP | Powder | Hydrocolloid, rheological agent for cement and gypsum-based mortars (thixotropy and anti-segregation), high anti-segregation effect; fast action, succinoglycan. |
| Axilat™ RH 23 | Powder | Hydrocolloid, rheological agent for mortars, renders and paints; xanthan gum. |
| Axilat™ RH 50 MD | Powder | Hydrocolloid, rheological agent for mortars, renders and paints; xanthan gum. |
| Axilat™ SA 502 | White solid | Setting and hardening accelerator, for cement modification, underlayments; solvent free; UV-stable. |
| Axilat™ UP 460S | Powder | Hydrophobic vinyl acetate/vinyl versatate/acrylate core-shell terpolymer resin in redispersible powder form; used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates, hydrophobic and mechanical properties (flexibility, abrasion resistance and cohesive strength); can be applied around 5°C and in a wide range of applications. EMICODE EC1+ classification can be achieved due to the very high alkaline resistance of the product. |
| Axilat™ UP 600 B | Powder | Vinyl acetate, vinyl versatate and maleic ester copolymer resin in redispersible powder form, used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates, hydrophobic and mechanical properties (flexibility, abrasion resistance and cohesive strength). |
| Axilat™ UP 620 E | Powder | Vinyl acetate, vinyl versatate and maleic ester copolymer resin in water redispersible powder form, used in dry mortars to improve workability of fresh mortar, adhesion to conventional substrates, hydrophobic and mechanical properties (flexibility, abrasion resistance and cohesive strength). High performance tile adhesive mortars (including tile adhesives with extended open-time and flexible tile adhesives), joint mortars, repair mortars, gypsum-based compounds, facade renders. |
| BLACK PEARLS® 4350 | Pearls | Carbon black - plastic / masterbatch / foil, complies with the requirements of FDA 21 CFR 178.3297. |
| BLACK PEARLS® 880 | Pearls | Carbon black - Medium Color - lacquer / printing ink / plastic, fluffy carbon black designed for coatings and liquid dispersions |
| CSX™ 864 | Pearls | carbon black - plastic / masterbatch / foil |
| CastleRes AK-81 | Pastilles | Urea-aldehyde resin to improve adhesion, gloss, yellowing resistance and hardness; shows excellent compatibility and solubility in many coating formulations; for universal pigment pastes, industrial interior/exterior metal coatings, alkyd resins and automotive OEM. |
| Chemark 1355 | white to off-white fine powder | Matting hardener for pure epoxy or epoxy/polyester powder coatings. |
| Chemark 1368 | white to off-white fine powder | Matting hardener for pure epoxy or epoxy/polyester powder coatings. |
| Dammar weiß A Type 5200 | big lumps | Recent resin; for wood and paper finishing, adhesives, varnishes and coatings.Allows formulating high solids, fast drying, water resistant inks and overprint varnishes. |
| ELFTEX® 410 ELFTEX® 415 | Powder Pearls | Carbon black - high gloss printing inks |
| ELFTEX® 460 | Pulver | Carbon black - lacquer / paint / plastic |
| ELFTEX® P100 | | Carbon black, P-type carbon blacks are specialty blacks with narrow product specifications for applications requiring exceptional UV performance and excellent physical and chemical cleanliness; Main applications: is especially suited for use in plastic products requiring excellent UV protection (Pressure pipe for potable water and gas (ISO4427 and ISO4437 standards), irrigation pipe, utility pipe, geomembranes). |
| ELFTEX® TP | Perlen | Carbon black - plastic |
| EMPEROR® 1600 | Pearls | Carbon - High Color - black for automotive (repair / OEM) feature exceptional color performance and processability for solvent-based applications, and deliver deep black color with a blue undertone. |
| EMPEROR® 2000 | Powder | Carbon black - High Color - that is especially designed to provide excellent performance in waterborne automotive coatings (Repair/OEM). Employing a proprietary chemical surface treatment, the product imparts very high jetness, blue undertone, gloss and DOI. Also, unlike traditional high color carbon blacks, the unique surface treatment allows for easier dispersion, enhanced coatings stability and improved weatherability. |
| Easaqua™ L 600 LM | ≥ 96,5% | Low viscosity water dispersible aliphatic polyisocyanate based on Hexamethylene diisocyanate for 2K-systems, APEO-free; Benefits: Easy dispersibility into water, flexibility, heat & humidity resistance, VOC reduction, excellent DTM adhesion.Applications: Automotive OEM & refinish, Construction, General Industry. |
| Easaqua™ M 502 LM | > 97% | Water dispersible aliphatic polyisocyanate based on Hexamethylene diisocyanate for high performance 2K-systems, APEO-free, Benefits: easy dispersibility into water, VOC reduction, weathering resistance. Applications: General Industry, Transportation |
| Easaqua™ X M 505 LM | ≥ 98 % | Low viscosity water dispersible aliphatic polyisocyanate based on Hexamethylene diisocyanate for 2K-systems; APEO-free, hydrophilic; Benefits: Adhesion, chemical and stain resistance, fast drying & stackability, VOC reduction; Aplications: Adhesives, Plastics, Construction, Wood, Flooring, leather and printing inks. |
| Easaqua™ XD 401 | 85% in butyl acetate | Water-dispersible aliphatic polyisocyanate, fast drying, for high performance 2K-systems; benefits: easy dispersibility into water, fast drying & stackability, hardness, longer pot life, high optical (gloss) properties; Applications: Automotive OEM & refinish, Transportation, Wood, Plastic coatings. |
| Easaqua™ XD 803 | 69 % | Fast drying ready-to-use water-dispersible aliphatic polyisocyanate for high performance 2K-systems; Benefits: abrasion resistance, easy dispersibility into water, fast drying & Stackability, hardness, high gloss, longer pot life. Applications: General Industry, Transportation, Wood |
| Easaqua™ XD 870 | 69 % | Fast drying ready-to-use water-dispersible aliphatic polyisocyanate, be compliant to AgBB, for high performance 2K-systems; Benefits: easy dispersibility into water, hardness, longer pot life. Applications: Construction, Wood |
| Emultex™ FR 728 | liquid | Colloid stabilised vinyl acetate-vinyl versatate copolymer dispersion, for water-borne intumescent coatings, provides a quick char formation with high expansion factor, for fire protection up to R60. |
| Emultex™ FR 737 | liquid | Colloid stabilised vinyl-acetate/VeoVa10/acrylate-copolymer-dispersion, for water-borne intumescent coatings, provides a quick char formation with high expansion factor. |
| Emultex™ FR 797 | liquid | Colloid stabilised vinyl acetate-vinyl versatate copolymer dispersion, for water-borne intumescent coatings, provides a slow char formation with medium expansion factor, for fire protection up to 120min. Fire protection paints for steel structures. |
| Emultex™ VV 530 | flüssig | Polyvinylacetate dispersion - packaging and wood adhesives / construction adhesives and sealants. |
| Emultex™ VV 665 | flüssig | Polyvinylacetate dispersion - decorative coatings. |
| Emultex™ VV 675 | flüssig | Polyvinylacetate dispersion - decorative coatings. |
| Emultex™ VV 679 | flüssig | Polyvinylacetate dispersion - decorative coatings. |
| Epomatt G-152 | 99 % non volatile | Matting agent for matt and dead matt epoxy powder coatings. Matting of low temperature curing epoxy powders in combination with Epoxy Hardener G-91 and of low temperature curing (140°C) hybride powders with suitable polyester type. Also for NIR application. |
| Epomatt G-154 | Granulate | Acryl functional acrylic resin for matt powder Coatings based on epoxy-polyester. Also for curing at lower temperatures. |
| Epoxid hardener G-91 | 100 % | Imidazole adduct for curing epoxy powder coatings at low baking temperature with still good mechanical properties. |
| Epoxid hardener G-92 | min. 98,5 % non volöatile content | Catalysed phenolic curing agent for epoxy resins. Imparts excellent chemical resistance and mechanical properties at fast cure (200°C) or low temperature cure (120°C). |
| Escat 50 | 100 % | Substituted Imidazole/wax blend to improve curing of powder coatings; easily dispersible. |
| Gilsol 27 TD | 27% | Natural asphalt (Gilsonite); for wood protection and black paints; very good penetration properties. |
| Gilsonite® Selects 347 | small lumps | Grinding resin for carbon black based news and heatset inks, paints and stains, protective coatings |
| Hydro Pliolite™ 010 | liquid | Aqueous styrene acrylate dispersion, base: Emulsifed Binding System (EBS), excellent adhesion to porous substrates and film formation even at low temperatures and high humidity, exterior masonry coatings, pigmented primers or tension-free interior coatings |
| Hydro Pliolite™ 050 | liquid | Aqueous acrylic dispersion, based on ABS (Amphoteric Binding System) technology, contains anionic and cationic groups, for low VOC stain blocking primers |
| Hydro Pliolite™ 211 | liquid | Aqueous styrene acrylate dispersion, developed for formulation of water-borne intumescent coatings, excellent water resitance, fire protection from R30 to R120. |
| Hydro Pliolite™ 330 | liquid | Aqueous acrylic dispersion, for wood coatings, excellent adhesion and improved film formation under adverse climatic conditions, for wood stains and wood trim paints. |
| INOCOT 601 | 42% | Lithium potassium silicate for the permanent consolidation and hardening of surfaces based on cement-bonded materials, it significantly improves the surface quality. It penetrates into the surface and reacts with the hydration product of the concrete. |
| INOCOT 602 | 21,3% | see under Inocot 601 |
| INOCOT 608 H | in Water | A ready to use lithium-potassium silicate for the water repellent treatment of surfaces based on cement-bonded materials (cementitious floors, terrazzo, screeds) and natural Stones; reduces the penetration of aqueous liquids and other dirt. |
| INOCOT 609 O | in Water | A ready to use lithium-potassium silicate for the oil and water repellent Treatment of surfaces based on cement-bonded materials (cementitious floors, terrazzo, screeds) and natural stones, reduces the penetration of aqueous liquids and oils. |
| INOCOT 611 A | 28% | lithium silicate for the permanent consolidation and hardening of surfaces based on cement-bonded materials, it penetrates into the surface and reacts with the hydration product of the concrete, it significantly improves the surface Quality. |
| INOCOT 612 | 14% | A ready to use lithium silicate for the permanent consolidation and hardening of surfaces based on cement-bonded materials, it penetrates into the surface and reacts with the hydration product of the concrete. |
| INOCOT 618 H | in Water | A ready to use lithium silicate for the water repellent treatment of surfaces based on cement-bonded materials (cementitious floors, terrazzo, screeds and natural stones), reduces the penetration of aqueous liquids and other dirt. |
| INOCOT 619 O | in water | see under Inocot 609 O |
| Isocryl EP-570 G | min. 98,5% non volatile content | GMA matting agent resin for "one-shot" matt powder coatings with good abrasion resistance and surface levelling, also suitable for matt clear coats. |
| K-Cure 1040 | 40 % in isopropanol | Highest gloss. Very fast cure. Excellent exterior durability. |
| K-Cure 129B | 50 % in methanol / mutanol | Fastest cure, for wood and paper coatings. |
| K-Flex 188 | 100 % | Improves flexibility, salt spray and condensation water resistance, shows highest reactivity and hardness of the K-Flex polyester types. Excellent adhesion to many substrates including plastics. Especially suitable forf 2 component PU coatings. |
| K-Flex A307 | 100 % | Low viscous polyesterpolyol with relatively low OH content. Modifying component for achieving higher flexiblity in acrylic resins / isocyanate systems and coatings based on acrylic / melamine resin. |
| K-Flex UD-320 | 82% methoxy propyl acetate | Addition achieves higher solids content, improves chemical and weather resistance. Hydrolytic stability. |
| K-Flex UD-320-100 | 100% | For water and solvent based systems. |
| K-Flex UD-350W | 88 % in Wasser | Without addition of amines or cosolvents water soluble. Addition achieves higher solids content, improves hardness, leveling, gloss and resistance properties. K-Flex UD-350W for optimum storage stability. |
| K-Flex XM-B301 | 100 % | Reactive diluent based on acetoacetate functionality mainly for 2 component EP systems for increasing reactivity and improving adhesion and corrosion resistance. |
| K-Kat 5218 | 65 % Polyglykol / 2,4-Pentandion | Effective catalyst based on an aluminium complexfor both baked and ambient cured 2 component urethane systems offeringsynergy with pot life extenders such as 2,4 - Pentanedione Excellent exterior durability |
| K-Kat A209 | Flüssig | Catalyst based on a zirconium complex mainly for aqueous 2 component PU coatings. Addition via isocyanate, do not add to the OH component. K-Kat A209 is considerably more reactive than K-Kat 6212. |
| K-Sperse 131 | 50 % | Low optimum use level 0.2 - 7.0% based on total weight of pigment. Particularly effective in air dry alkyds and epoxies. |
| K-Sperse 152 | 50 % Butylglycol | Can be used at 1/3 to 1/2 the level of typical commercial dispersants. |
| K-Stay 501 | 50 % | Rheology additive to avoid sagging on vertical surfaces. |
| Kopal 5001 | 100% | Alcohol soluble copal, show excellent hardness, long lasting elasticity and resistance to yellowing. In combination with other binders for food and paper fishing, floor lacquers and adhesives. |
| Köstropur ® 020408 | Pulver | Micronised silica powder with a hydrophilic surface and a high pore volume,filler for certain plastics (PA6, PA66, PMMA etc.) to improve mechanical properties. |
| Köstropur ® 020508 | Powder | Micronised silica powder with a hydrophilic surface and a high pore volume, for plastics as an antiblocking agent, untreated, (PP/PE). |
| Köstropur ® 020612 | Powder | Micronised silica powder with a hydrophilic surface and a high pore volume, for plastics as anti-blocking agent (PP/PE). |
| Köstropur ® 020812 | Pulver | Micronized silica gel, white powder of amorphous silica with a hydrophilic surface at high pore volume, functional filler in plastic materials and coatings, as anti-blocking agent (PE) |
| Köstropur ® 021012 | Pulver | Micronised silica powder with a hydrophilic surface and a high pore volume, for plastics as anti-blocking agent (PP). |
| Köstropur ® 050418 | Powder | Micronised silica powder, with a hydrophilic surface and a high pore volume. Used as a functional filler in plastics or coating applications, as a flow aid in the processing of powdered systems or as an auxiliary in catalyst production. |
| Köstropur ® 050612 | | Micronized silica gel, white powder of amorphous silica with a hydrophilic surface at high pore volume, functional filler, matting agent for paints/lacquers, increasing scratch and abrasion resistance. |
| Köstropur ® 050618 | Pulver | Micronised silica powder, with a hydrophilic surface and a high pore volume, matting agent for coatings. |
| Köstropur ® 050818 | Pulver | Micronised silica powder with a hydrophilic surface and a high pore volume, matting agent for coatings. |
| Köstropur ® 051818 | Powder | Micronised silica powder, white powder of amorphous silica with a hydrophilic surface and a high pore volume, matting agent for coatings. |
| Köstropur ® 100808 | Pulver | Micronised silica powder with a hydrophilic surface and a high pore volume, filler for certain plastics (PA6, PA66, PMMA etc.) to improve mechanical properties. |
| Köstropur ® W050618 | Pulver | Micronised silica powder with a hydrophobic surface and a high pore volume, matting agent for coatings, organic surface treatment. |
| Köstropur ® W050818 | Pulver | Micronised silica powder with a hydrophobic surface and a high pore volume, matting agent for coatings, organic surface treatment. |
| Köstrosol 0730 | flüssig | Colloid-disperse solution of SiO2 in water. Additive to formulate heat and corrosion resistant coatings, improvement of scratch resistance and mechanical properties, to keep transparency, for fast curing systems, good green concrete strength. |
| Köstrosol 0830 | 30% | Opalescent aqueous colloidal nanoparticle dispersion of amorphous silicon dioxide; as a component of heat- and corrosion-resistant coatings, anti-slip coating, coil coating, improvement of scratch and abrasion resistance, corrosion, mechanical properties (fracture resistance), for cement ground stabilisation, concrete surface modification, investment casting. |
| Köstrosol 1030 | liquid | Colloid-disperse solution of SiO2 in water, concrete & cement mortar additive, consolidation of sandy subsoils by closing of the finest soil cracks & capillaries, self-compacting concretes, reduce sedimentation, control of flow behavior, as component of heat- and corrosion-resistant coatings |
| Köstrosol 1540 | flüssig | Aqueous dispersion of synthetic amorphous nanoscale silica particles. Additive to formulate heat and corrosion resistant coatings, improvement of scratch resistance and mechanical properties, as filler and matting agent and as derivatisation component. |
| Köstrosol 2030 | liquid | Colloidal nanoparticle dispersion of amorphous silicon dioxide in water; this middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+), ceramic insulation. |
| Köstrosol 2030 D | | Colloidal nanoparticle dispersion of amorphous silica in water, medium particle size, it has a noncharged (full-deionized) surface without any stabilization (counter ion). |
| Köstrosol 2040 AS | flüssig | Aqueous dispersion of modified synthetic amorphous nanoscale silica particles; this middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Ammonia (NH); Additive to formulate heat and corrosion resistant coatings, improvement of scratch resistance and mechanical properties, as filler and matting agent, as derivatisation component and especially suitable for alkali-sensitive applications. |
| Köstrosol 2040 P | liquid | Aqueous dispersion of modified synthetic amorphous nanoscale silica particles; this middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na); Application: Fire protection application (fire protection glass), adhesives industry (functional fillers & binders for adjusting viscosity, increasing thermal stability & mechanical reinforcement), ceramic industry (ceramic insulation, vacuum forming products), contains a biocide agent. |
| Köstrosol 3550 | flüssig | Aqueous dispersion of synthetic, amorphous, nanoscale silica particles. Additive to formulate heat and corrosion resistant coatings, improvement of scratch resistance and mechanical properties, as filler and matting agent, stable against various additaments, turbid effect. |
| Köstrosol 3550 P | liquid | Aqueous dispersion of synthetic, amorphous, nanoscale silica particles, this large-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na); contains a biocide agent; application: electronics & optics (semiconductor trchnology, lens production). |
| Köstrosol A 1230 | liquid | Colloid-disperse solution of SiO2 in water. Additive to formulate heat and corrosion resistant coatings, improvement of scratch and abrasion resistance and mechanical properties; dental applications, investments |
| Köstrosol AD 1530 | flüssig | Aqueous dispersion of modified synthetic amorphous nanoscale silica particles. Additive to formulate heat and corrosion resistant coatings, improvement of scratch resistance and mechanical properties, good compatibility with many additives, universal use. |
| Köstrosol K 1530 | liquid | Aqueous dispersion of modified synthetic amorphous nanoscale silica particles; This middle-size colloidal silica has a positively charged surface (cationic) which is stabilized by Chloride (Cl); Application: textiles & fabrics (coating, impregnation, stabilisation), paper finishing. |
| Köstrosol WA 1520 | liquid | Aqueous dispersion of modified synthetic amorphous nanoscale silica particles, this middle-size colloidal silica is pre-final coated and stabilized by aluminum oxide, afterward, the pH is adjusted by a strongly acidic ion exchange; application: Application: Paints, varnishes & pigments (fillers & matting agents, adhesion, scratch resistance and breaking strength for various substrates such as paper, metal, wood, heat and corrosion protection), catalyst production, zinc & chrome coatings. |
| Köstrosol WA 1530 | liquid | see below Köstrosol WA 1520 |
| Lipaton™ SB 20W20 | flüssig | Styrene butadiene latex - water proofing, is for the modification of quick drying 1- and 2C-bitumensystems, it gives excellent low temperature flexibility. |
| Lipaton™ SB 2540 | flüssig | Styrene butadiene latex - water proofing / construction adhesives and sealants; hohen Feststoffgehalt und sehr niedrige Glasübergangstemperatur besonders für die Modifizierung von anionischen Bitumenemulsionen geeignet, Zusatz erweitert den Plastizitätsbereich modifizierter bituminöser Abdichtungssysteme (insbesondere Kälteflexibilität und Hitzebeständigkeit). |
| Lipaton™ SB 29Y141 | flüssig | Styrol butadiene latex - is used for modification of hydraulic binders in common applications including repair mortar, flooring, rendering,bonding, mineral sealing slurries and as cement based adhesive. |
| Lipaton™ SB 30Y160 | flüssig | Styrene butadiene latex - Mortar. |
| Lipaton™ SB 40Y40 | liquid | Styrene butadiene latex - used for modification of hydraulic binders in common applications including repair mortar, flooring, rendering,bonding, mineral sealing slurries and as cement based adhesive, improves the rheology. |
| Lipaton™ SB 40Y45 | liquid | Styrene butadiene latex - used for modification of hydraulic binders in common applications including repair mortar, flooring, rendering,bonding, mineral sealing slurries and as cement based adhesive, improves the rheology; contains an antifoam. |
| Lipaton™ SB 47B40 | flüssig | Styrene butadiene latex - water proofing. |
| Lipaton™ SB 5521 | flüssig | Styrene butadiene latex - speciality coatings. |
| Lipaton™ SB 60B11 | flüssig | Styrene butadiene latex - water proofing, is suitable as a binder to formulate flexible 1C damp proof membranes, for membrane systems used beneath ceramic tiles; reduced VOC level, flexible and has good adhesion to mineral and metallic surfaces. |
| Lipren™ B | flüssig | Water based chloride butadiene dispersion - water proofing. |
| Lipren™ B | liquid | Water based chloride butadiene dispersion, for the production of dipped goods, internal and external proofing of fire hoses andimpregnation, coating and lamination of fabrics. Excellent physical properties, high elasticity and strength, important is an optimal cross-linking, necessary use besides zinc oxide also diphenyl-thiourea and colloidal-sulphur as crosslinking agents. |
| Lipren™ MKB | flüssig | Water based chloride butadiene dispersion - textiles & fibre bonding. |
| Lipren™ SK | flüssig | Water based chloride butadiene dispersion - textiles & fibre bonding. |
| Litex™ N 3415 M | flüssig | Butadiene acrylonitrile dispersion - textiles & fibre bonding |
| Litex™ N 7100 | flüssig | Butadiena acrylonitrildispersion - textiles & fibre bonding; for leather finishing formulations, Advantages are high flexibility, very good mechanical and chemical stability, good adhesion |
| Litex™ N 7400 | flüssig | Butadiena acrylonitrildispersion - textiles & fibre bonding; leather finishing formulations; advantages are - high flexibility - excellent resistance against organic solvents - very good adhesion to various substrates. |
| Litex™ N XA 1739 | liquid | Butadiene acrylonitrile dispersion - textiles, fibre bonding, flock adhesive - high flexibility, excellent barrier properties against many chemicals, high tensile strength, superior abrasion resistance |
| Litex™ NX 1200 | flüssig | Butadiene acrylonitrile dispersion - textiles & fibre bonding |
| Litex™ P 5100 | flüssig | Styrene butadiene latex - technical paper / footwear |
| Litex™ S 61 | liquid | Aqueous, colloidal dispersion of a styrene-butadiene copolymer - used to manufacture food can sealing compositions. Does not contain any antioxidant. It is free of biocides. |
| Litex™ S 9076 | flüssig | Styrene butadiene latex - Textiles and Fibre Bonding |
| Litex™ SBV 600 | flüssig | Styrene butadiene latex - textiles & fibre bonding / technical paper / footwear |
| Litex™ T 68W20 | liquid | Styrene butadiene latex, aqueous dispersion of a carboxylated styrene-butadiene copolymer - textiles & fiber bonding, technical papers, footwear, impregnation of needle felt, finishing of woven carpets, it give the finished article a hard handle and is fully compatible with Litex® T 64W20. The products can be mixed in any ratio to obtain the desired handle. |
| Lithene™ ultra AH | flüssig | Lithene non functional |
| Lithene™ ultra AL | flüssig | Lithene non functional |
| Lithene™ ultra AL-15MA | flüssig | Lithene functional. |
| Lithene™ ultra N4-5000 | flüssig | Lithene non functional |
| Lithene™ ultra N4-5000-15MA | flüssig | Lithene functional |
| Lithene™ ultra N4-9000 | flüssig | Lithene non functional |
| Lithene™ ultra N4-B-10MA | flüssig | Lithene functional |
| Lithene™ ultra P4-150P | flüssig | Lithene non functional |
| Lithene™ ultra P4-25P | flüssig | Lithene non functional |
| Lithene™ ultra PH | flüssig | Lithene non functional. |
| Lithene™ ultra PM4 | flüssig | Lithene non functional |
| Lithene™ ultra PM4-7.5MA | flüssig | Lithene functional |
| MOGUL® E | Pulver | Carbon black - UV-curing Systems; a low structure specialty carbon black pigment designed for the demanding challenges of the ultraviolet (UV) cured ink market. |
| MOGUL® L | Powder | Carbon black - lacquer / printing ink; specialty carbon black pigment that is designed to impart high gloss and high jetness in printing inks, coatings and electrostatic toner applications. |
| MONARCH® 1000 | Powder | Carbon black - lacquer, a treated specialty carbon black pigment designed to impart excellent jet masstones with strong tinting strength in high performance automotive, industrial and architectural coatings. |
| MONARCH® 120 BLACK PEARLS® 120 | Pearls Pulver | Carbon black - lacquer / printing inks; effective opacifying and tinting carbon black with low to medium weatherability that offers good blue undertones. It can be used in various applications. |
| MONARCH® 1300 BLACK PEARLS® 1300 | Powder Pearls | Carbon black - High Color - lacquer; designed for liquid and powder coatings that require high color properties, such as automotive base coats; it has high color strength and strong undertone characteristics in both solvent and aqueous systems; it imparts a relatively strong blue undertone and level of gloss. |
| MONARCH® 1400 | Fluffy | Carbon black - High Color - lacquer; designed for liquid and powder coatings that require high color properties, such as automotive base coats. It has high color strength and strong undertone characteristics in both solvent and aqueous systems. |
| MONARCH® 280 | Powder | Carbon black - lacquer / printing ink / plastic; general purpose, easy-to-disperse carbon black with good ultraviolet (UV) and weatherability characteristics. |
| MONARCH® 430 ELFTEX® 430 | Powder Pearls | Carbon black - lacquer / printing ink / plastic; a general purpose pigment black suitable for a variety of pigmenting applications. |
| MONARCH® 4750 BLACK PEARLS® 4750 | Pearls Powder | Carbon black - lacquer / printing ink / plastic, complies with the requirements of FDA 21 CFR 178.3297. |
| MONARCH® 490 BLACK PEARLS® 490 | Powder Pearls | Carbon black - lacquer / printing ink / plastic / adhesive; this pigment, used in adhesives and sealants, is also suitable for a broad range of printing ink applications, including water-based flexographic inks. |
| MONARCH® 570 ELFTEX® 570 | Powder Pearls | Carbon black - lacquer / printing ink / plastic / adhesive / sealant; a general purpose specialty carbon black offering high jetness with good dispersibility. |
| MONARCH® 580 BLACK PEARLS® 580 | Powder Pearls | Carbon black - lacquer / printing ink / plastic; general purpose pigment is used in adhesives and sealants. Its high color intensity makes it ideal for newspaper printing inks. |
| MONARCH® 700 | Powder | Carbon black -Medium Color - lacquer / printing ink / plastic; specialty carbon black that offers a balance of properties that promote high jetness and blue undertone in applications for coatings and liquid dispersions, ideal for medium to high color black applications. |
| MONARCH® 800 BLACK PEARLS® 800 | Pearls Powder | Carbon black -medium color - lacquer / printing ink / plastic, offers a balance of color and viscosity where superior jetness is required for interior/exterior automotive, electronic, appliance and business machine applications. |
| MONARCH® 900 | Powder | Carbon black -medium color - lacquer / printing ink / plastic, offers a balance of color and viscosity where superior jetness is required for interior/exterior automotive, electronic, appliance and business machine applications. |
| Majestic® 710 | Pellets | Highly dispersible Carbon Black for water-based systems, provides a premium colour performance and exceptional dispersibility due to special surface modification, the time-consuming milling step can be dispensed with, likewise, no high quantities of dispersing agent are required for incorporation and stabilization; can be used in a variety of industrial applications, including decorative and industrial coatings, adhesives, fiber dyeing and concrete/cement colouring; enables a more sustainable colour solution. |
| Merginamid A 105 | | Solvent-based, modified polyaminoamide-adduct; for corrosion protecting (shipbuilding), mineral substrates (building industry), clear and pigmented lacquers, graining andrust-preventing primers, tar-epoxy combinations andothers; tack free film forming even at high air humidity (up to 95 %) and temperatures about 10 °C; long potlife, short drying time, high gloss, outstanding mechanicaland chemical properties. |
| Merginamid A 112 | | Solvent-based, modified polyaminoamide-adduct; tackfree films at high air-humidity (approx. 80%) and temperatures about 10°C; excellent flow properties, short drying time, high gloss and outstanding mechanical and chemical properties; paint- and building protection industry, for clear and pigmented lacquers, graining and rust-prevention primers, tar epoxy combinations and others. |
| Merginamid A 130 | | Solvent-based, modified polyaminoamide-adduct, accelerated versionof Merginamid A 112. |
| Merginamid A 140 | | Solvent-based, modified polyaminoamide-adduct; to be used on steeland mineral substrates, long potlife, excellent flow properties, short drying time, high gloss, applicable even at high air-humidity (up to 70%) and at temperatures about 10°C; for clear and pigmented lacquers, graining and rust-prevention primers. |
| Merginamid A 154 | | Solvent-free, modified polyaminoamide adduct, dissolved in water; production of self-emulsifying aqueous primers, coatings and adhesives, very good adhesion properties to metals, mineral substrates and plastics; good corrosion protection properties |
| Merginamid A 155/2 | liquid | Solvent-free, modified polyaminoamide adduct; water-based, self-emulsifying hardeners for liquid epoxy resins and solid resin emulsions are characterised by very fast physical drying and long processing times, good mechanical and chemical resistance; excellent adhesion to metals, mineral substrates and plastics; excellent and tackfree hardening even on wet surfaces; as a hardener for flexible coatings; in the construction sector and corrosion protection. |
| Merginamid A 160 | liquid | See A 155/2, in addition suitable for paving joint mortar und vertical coatings |
| Merginamid A 210/5 | approx. 55% | Solvent-free, modified polyaminoamide adduct; water-based, self-emulsifying hardeners for liquid epoxy resins and solid resin emulsions are characterised by very fast physical drying, for self-leveling of thick floor coatings up to 4 mm; rapid water release, after 30 h walkable, fast-curing coatings with good flow and excellent adhesion to metals and mineral substrates as well as high chemical resistance; for corrosion protection coatings,concrete primers, floor and wall paints, epoxy cementmortars, industrial coatings; preferable used with reactive diluted resins. |
| Merginamid A 211 | | Solvent-free, modified polyaminoamide adduct; self-emulsifying aqueous curing agent for self-leveling of thick floor coatings; application/properties as A 210/5, due to lower viscosity vs. A 210/5 to be used with standard liquid resins. |
| Merginamid A 212 | | Modified polyamin adduct; waterbased, self-emulsifying hadener for production of epoxy coatings on mineral and metal substrates; light inherent colour and lowyellowing. |
| Merginamid A 213 | | Modified polyaminoamide-adduct; for water reducible epoxy coatings; outstanding water and salt spray resistance, for corrosion protection of metal substrates. |
| Merginamid A 220 | | Solvent-based, modified polyaminoamide-adduct; for solvent based coatings with fast physical drying, tack free curing upto approx. 80 % relative air humidity; high chemical resistance, especially against hydraulic and brake fluids; excellent adhesion to Aluminium. |
| Merginamid A 226 | | Polyamine-adduct; for water reducible coatings (primer and top coats up to 150 µm) on metal surfaces; very good wet adhesion also on not carefully treated substrates. |
| Merginamid A 227 | | Self-emulsifying polyamine-adduct; for primers and topcoats to be used on mineral and metal surfaces; very light inherent color and low yellowing; also suitable for epoxy cement concrete (ECC) |
| Merginamid A 240 | | Solvent-based, modified polyaminoamide-adduct; for solvent based coatings and high solids for primers and top coats with extremely fast surface drying; tack-free films even at high air-humidity and temperatures about 5 °C. |
| Merginamid A 2425 | liquid | Solvent-free polyaminoamide-adduct for high-quality coatings; mortars; good chemical resistance; high water resistance; high UV stability |
| Merginamid A 256 | liquid | Solvent-free adduct hardener, very reactivepolyaminoamide-adduct that accelerate the curing of liquid epoxy resins with Merginamid L-types and allows application at temperatures around 0 °C and 95 % humidity, clear and tack-free films with high gloss. |
| Merginamid A 260 | 100 % | Solvent-free polyaminoamide-adduct, suited for coatingson difficult concrete surfaces, for sticking together concrete parts, for corrosion protection, adhesive and for underwater coatings (tack free hardening even at extremely high air humidity), antifouling paints. |
| Merginamid A 280 | 100 % | Low-viscosity, solvent-free polyaminoamide-adduct, especially suited for coatings on difficult concrete surfaces, for sticking together concrete parts and high quality high solid coatings for corrosion protection and marine applications, outstanding adhesion on wet concrete and sandblasted steel, smooth, glossy and tackfree hardening films with high corrosion protection properties. |
| Merginamid A 280 | | solvent-free Polyaminoamide-adduct with especially long gel time(> 12 h at RT); for sealings and adhesives. |
| Merginamid A 282 | liquid | Low-viscosity, solvent-free polyaminoamide-adduct, a benzyl alcohol free version of Merginamid A 280. |
| Merginamid A 380 | | Solvent-free, modified polyaminoamide-adduct, for primers and coatings with outstanding adhesion on wet concrete and on other substrates with damp surfaces and poor wettability; preferably it is applied in high quality high solid coatings for corrosion protection and marine applications. |
| Merginamid L 190 | liquid | High viscosity polyaminoamide; for solvent-based coatings; corrosion protection (direct-to-metal), industrial floor coatings, mortars, casting resins, mould making and reaction adhesives; excellent adhesion to metals and concrete, excellent flexibility and impact strength, low heat generation and shrinkage during curing. |
| Merginamid L 190-70 | approx. 70 % | Solvent-based polyaminoamide hardener with fast physical drying of paints, high chemical resistance, very good adhesion; inlet primers; rust protection primers; epoxy-tar-combinations. |
| Merginamid L 250 | | Reactive polyaminoamide; production of solvent based coatings. |
| Merginamid L 275 | liquid | Reactive polyaminoamide; for high solid coatings, self-levellingfloorings, adhesives, putties, mortars, casting resin, laminated materials, mould making; KTW conformity (drinking water ordinance);excellent adhesion to metals and concrete, good mechanical properties, long processability. |
| Merginamid L 295 | liquid | Solvent-free polyaminoamide-adduct, as a slow reacting epoxy resin hardener with a long open time and very low reaction temperature, there is no shrink observed during curing, for casting and sealing applications. |
| Merginamid L 375 | liquid | Reactive polyaminoamide, solvent-free, for production of coatings, putties, mortars,adhesives and casting resins. |
| Merginamid L 390 | liquid | Very low viscosity polyaminoimidazoline; for solvent free coatings, sealings, industrial floor coatings, mortars, artificial resin cements, moulding compounds, model making, casting resins, reactive adhesives; lower viscosity and slower reactivity than polyaminoamides; long potlife, good mechanical properties, excellent adhesion to metals, concrete, glass, paper, plastics, high flexibility. |
| Merginamid L 410 | liquid | Reactive polyaminoamide; for production of coatings, putties, mortars, adhesives and casting resins. |
| Merginamid L 445 | 100 % | Polyaminoamide hardener, medium viscous solvent-free polyaminoimidazoline, for corrosion protection, solvent-basedcoatings, adhesives, casting resins, synthetic resin cements with thermal stress, repair compounds, electric isolating cements, molding resins, heat resistant mortars and marine coatings; excellent adhesion to metals, concrete, glass, paper, plastics, good mechanical properties, long processing time. |
| Merginamid L 450 | liquid | Reactive polyaminoamide; for solvent-free coatings, sealings, industrial floor coatings, artificial resin cements, casting resins, moulding compounds, reactive adhesives, putties, mortars; excellent adhesion to metals and concrete, high flexibility and impact strength, low cure heating and shrinkage, excellent water and chemical resistance. |
| Merginamid L 500 | liquid | Polyamino imidazoline, low viscosity; for high solid systems; press compounds; model and mold making; reactive adhesives; good compatibility with epoxy resins; excellent adhesion to metals and concrete, high flexibility and impact strength, low cure heating and shrinkage, excellent water and chemical resistance. |
| Merginat ELO | liquid | Oleochemical epoxy compound based on linseed oil, with a very high epoxy oxygen content; it is used in cationic curable inks and coatings to improve coating flexibility and impact resistance, also as plasticizer (for PVC and nitrocellulose) and co-stabilizer, improves heat-, light- and aging-resistance of many plastic materials and resins. |
| Merginat ESBO | liquid | Epoxidized vegetable oil based on soybean oil, high oxirane content, low emission; plasticizer for PVC und nitrocellulose and co-stabilizer, improves the heat-, light- and aging-resistance of many plastic materials and resins, standard type. |
| Merginat ESBO 02 Merginat neo ESBO 02 Merginat RTRS ESBO 02 | liquid | Epoxidized vegetable oil based on soybean oil. It is used as a plasticizer and co-stabilizer, it improves the heat-, light- and aging-resistance of many plastic materials and resins; very low acid value and residual iodine value, very high oxirane oxygen content; high molecular weight; high oil strength; low volatility; good migration resistance.Merginat neo ESBO 02 - vegetable oil from controlled, European cultivationMerginat RTRS ESBO 02 - Soya oil certified by the Round Table on Responsible Soy (RTRS) Association |
| Merginat ESBO LH | liquid | Epoxidized vegetable oil based on soybean oil, very low colour value; it is used as a plasticizer and co-stabilizer, it improves the heat-, light- and aging-resistance of many plastic materials and resins. |
| Merginat UV 8107 | liquid | Radiation-curable binder based on vegetable oil; no inhibiting by oxygen occurs during hardening;flexible and scratch resistant films, good adhesion on wood, paper, leather, cork and foils (PVC, PE,polyester), good chemical resistance; for radiation curing coatings, lacquers, adhesives and printinginks. |
| Merginol 100 | liquid | Polyol based on vegetable oil with primary and secondary hydroxyl groups, the renewable content is very high, properties: hydrophobic, resistance against hydrolysis and ethanol, low viscosity, gloss improvement; is preferably used in flexible foams, PU dispersions, sealants and casting resins. |
| Merginol 1021 | liquid | Polyol based on vegetable oil with primary and secondary hydroxylgroups; very high renewable content, hydrophobic, good chemical resistance; for casting resins, pigment pastes and 2K coatings especially floorings. |
| Merginol 1060 | liquid | Polyol based on vegetable oil with primary and secondary hydroxylgroups; ery high renewable content, hydrophobic, good chemical resistance, flexibility at low temperatures; for casting resins, 2K coatings, sealants, primers. |
| Merginol 1200 | | Polyol based on vegetable oil, free of aromatics, the bio-based carbon content is at 100%, very good flexibility and high hydrophobicity, is used in foams, casting resins, 2-part coatings, sealants and many other areas. |
| Merginol 207 | flüssig | Base polyol, based on vegetable oil with primary and secondary hydroxyl groups, very high renewable content, it is preferably used in flexible foams, PU dispersions and casting resins; advantages: hydrophobicity, gloss enhancement, hydrolysis resistance and chemical resistance. |
| Merginol 208 | liquid | Additive polyol, based on vegetable oil with primary and secondary hydroxyl groups, very high renewable content, it is preferably used in PU dispersions; advantages hydrophobicity, gloss enhancement, adjustment of hydroxyl value and viscosity and high ethanol resistance. |
| Merginol 240 | liquid | Basic and additive polyol, based on vegetable oil with primary and secondary hydroxyl groups, very high renewable content, it is preferably used in floorings, 2K coatings, flexible foams, adhesives, sealants and casting resins; advantages: toughness, wear resistance, chemical resistance. |
| Merginol 900 | liquid | Branched Polyester/-etherpolyol, free of aromatics, biobased carbon content is at 100%, offers good impact resistance and tensile strength, high shore D hardness; application: casting resins, floorings, 2C coatings, foams, adhesives, sealants. |
| Merginol 901 | liquid | Basic and additive polyol, branched polyester/-etherpolyol, with primary and secondary hydroxyl groups, aromatic-free, very high renewable content, for casting resins, self-levelling floorings, 2K coatings, foams, adhesives, sealants, UV stable coatings, highly hydrophobic, good chemical resistance and hardness, high Tg, UV stability, light colour. |
| Merginol 903 | liquid | Basic and additive polyol, branched polyester/-etherpolyol, with primary and secondary hydroxyl groups, aromatic-free. very high renewable content, for casting resins, 2K coatings, sealants, primers and adhesives - especially for flexible systems, extremely high hydrophobicity (hardening under water is possible), elasticity/flexibility, low viscosity (viscosity regulation), long pot life, gel time extension, hydrolysis and chemical resistance, UV stability. |
| Merginol 904 | liquid | Branched Polyester/-etherpolyol; aromatic-free; preferred are viscoplastic to hard coatings requiring high wear and chemical resistance; high toughness; for casting resins, 2K coatings, floorings, adhesivesand many more areas. |
| Merginol 905 | liquid | Basic and additive polyol, branched polyester/-etherpolyol, with primary and secondary hydroxyl groups, aromatic-free, very high renewable content, for casting resins, 2K coatings, sealants, floorings, adhesives, hydrophobic, high wear resistance, hydrolysis and chemical resistance. |
| Merginol 908 | liquid | Basic polyesterpolyol, based on vegetable oil with primary and secondary hydroxyl groups; very high renewable content, for casting resins, floorings, 2K coatings, adhesives, sealants; hydrophobic, good chemical resistance, pigment wetting. |
| Merginol 909 | liquid | Branched Polyester/-etherpolyol based on vegetable oil; aromatic-free; very high renewable content, for casting resins – especially for electronics –, floorings, 2K coatings, adhesives, sealants; hydrophobic, good resistance against hydrolysis. |
| Merginol 910 | liquid | Branched Polyester/-etherpolyol based on vegetable oil; high hydrophobicity, exceptional wear resistance, high hardness; aromatic-free; for hydrolysis resistant castings, 2K coatings, floorings and other areas – especially for hard systems. |
| Nacure 1051 | 50 % in butyl glycol | Best water and corrosion resistance. For high curing temperatures. |
| Nacure 1323 | Flüssig | Excellent solubility in aromatic and aliphatic solvents, for high curing temperatures. |
| Nacure 155 | 55 % in isobutanol | General purpose catalyst with excellent water, detergent and salt spray resistance. |
| Nacure 1557 | Flüssig | Resolves solvent popping in thick films. Excellent humidity and detergent resistance. |
| Nacure 2107 | Flüssig | Avoids metal marking. |
| Nacure 2500 | Flüssig | Low temperature cure. Excellent stability of the finished product. |
| Nacure 2530 | Flüssig | Low temperature cure. Low tendency to yellow or wrinkle. |
| Nacure 2547 | Flüssig | Readily soluble in waterborne systems. Solvent-free. |
| Nacure 2558 | Flüssig | Reduces popping/blistering. |
| Nacure 3525 | Flüssig | Better solubility than X49-110, slower curing. Good salt spray resistance and adhesion. |
| Nacure 4000 | Flüssig | Wide solubility spectrum. For systems based on high methylated melamin resins and phenolic resins. Achieved excellent adhesion. |
| Nacure 4167 | Flüssig | Blocked acid catalyst for aqueous and solvent based stoving systems based on highly methylated melamine resins as well as phenolic resins. |
| Nacure 5076 | 70 % in isopropanol | Complies with FDA 21 CFR, Sec. 175.300 (b) (3) xiii (a&b). |
| Nacure 5225 | Flüssig | Best solubility in high solids enamels. Good solubility in aliphatic solvents. |
| Nacure 5414 | Flüssig | Polymeric blocked catalyst. Excellently suitable for electrostatic spray application. Good intercoat adhesion. |
| Nacure 5528 | Flüssig | Broad solubility. Excellent color stability. |
| Nacure 5925 | Flüssig | Complies with FDA 21 CFR, Sec. 175.300 (b) (3) xiii (a&b). |
| Nacure X49-110 | Flüssig | Best overall properties. Excellent water and corrosion resistance, adhesion. |
| Plextol™ A 420 | liquid | Pure acrylic dispersion, pressure sensitive adhesive based on an anionic stabilised aqueous dispersion of an acrylic polymer, excellent UV resistance, high adhesion, for paper and card applications, automotive applications |
| Plextol™ A 6474 | 45% | Pure acrylic dispersion -for low VOC wood coatings, DIY trim coatings, joinery topcoats; outdoor durability, high blocking resistance and flexibility, good intercoat adhesion and water spot resistance. |
| Plextol™ B 500 | flüssig | Pure acrylic dispersion - decorative coatings. |
| Plextol™ BV 380 | liquid | Pure acrylic dispersion, good light fastness, weathering and aging resistance, for boilproof finishing, coating and lamination of textiles and nonwovens, flocking of textiles - Cohesive blend component. - Anti-slip coating - foil coating with good adhesion to marble, tiles, wood and plastic. |
| Plextol™ BV 411 | flüssig | Pure acrylate dispersion - technical paper / footwear. |
| Plextol™ BV 595 | flüssig | Pure acrylate dispersion - technicla paper / footwear / textiles & fibre bonding. |
| Plextol™ BV 597 | flüssig | Pure acrylate dispersion - speciality coatings. |
| Plextol™ D 171 | 60% | Pure acrylic dispersion - applicable in many applications of pressure-sensitive adhesives (one-and double-sided tapes for the ranges construction, industry, packages and automotive industry) and sealants. |
| Plextol™ D 2040 | 48% | Pure acrylic dispersion - facade paints, primers, wood primers and low gloss wood topcoats; excellent UV-resistance, very low water sensitivity, good level of flexibility for wood substrates, good adhesion properties. |
| Plextol™ D 224 | 59% | Pure acrylic dispersion - for self-adherent coatings (on a variety of materials), can be used as a tackier with hydrophobic character. |
| Plextol™ D 268 | 55% | Pure acrylic dispersion - for PSA application; for tape application (e.g. for carton sealing tapes); excellent initial tack to fibre board, especially suitable for crystal clear and colorless tapes; good drying properties on fast running coating lines. |
| Plextol™ D 276 | 65% | Pure acrylic dispersion - for the production of tapes, for self-adherent coatings (on a variety of materials). |
| Plextol™ D 306 | flüssig | Pure acrylic dispersion - construction adhesives and sealants. |
| Plextol™ D 324 | liquid | Pure acrylic dispersion, aqueous, high solids dispersion of an acrylic ester copolymer, especially soft and cement compatible, suitable as an elasticizing additive. Use in flexible, water-resistant two-component building adhesive, sealants, cement containing systems such as flexible sealing compounds |
| Plextol™ D 335 | liquid | Pure acrylic dispersion, aqueous, high solids dispersion of a modified acrylic copolymer - forms a clear, tacky film above the MFT, particularly soft acrylic dispersion for use in flooring adhesives, balanced ratio of cohesion and adhesion |
| Plextol™ D 471 | liquid | Pure acrylic dispersion, finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer, forms a clear, slightly tacky film above the MFT, particularly soft acrylic dispersion applications: elastic topcoats for crack-bridging paints, synthetic resins, plasters, coatings on aerated concrete and primers. |
| Plextol™ D 487 | flüssig | Pure acrlic dispersion - decorative coatings. |
| Plextol™ D 498 | flüssig | Pure acrlic dispersion - decorative coatings. |
| Plextol™ D 509 | flüssig | Pure acrylic dispersion - mortar. |
| Plextol™ D 510 | liquid | Finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer, can be used as an allround binder; primary applications are: high-grade, non yellowing facade paints, synthetic resin plasters, coatings for concrete roof tiles, tinting paints, coatings for concrete, wood paints, and primers for mineral substrates; a non-yellowing, light resistant pure acrylic dispersion, which is characterized by excellent weatherability; Owing to its excellent stability it can be used as additive for hydraulically setting systems. |
| Plextol™ D 512 | flüssig | Pure acrylic dispersion with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance, recommended for decorative coatings, high quality masonry paints including mosaic plasters. It is as well suitable for concrete roof-tile renovation paints. |
| Plextol™ D 5241 | flüssig | Pure acrylic dispersion - water proofing. |
| Plextol™ DV 245 | flüssig | Pure acrylate dispersion - textiles & fibre bonding. |
| Plextol™ DV 544 | flüssig | Pure acrylate dispersion - technical paper / footwear. |
| Plextol™ DV 585 | liquid | Aqueous emulsion of a self-crosslinking acrylic polymer; good lightfastness and resistance to weathering & aging; coating and lamination of textiles & non-wovens. Bonding of fibrefills for the upholstery, clothing and bedding industry. |
| Plextol™ E 303 | flüssig | Pure acrylic dispersion - construction adhesives and sealants. |
| Plextol™ M 630 | flüssig | Pure acrylate dispersion - textiles & fibre bonding. |
| Plextol™ R 100 | flüssig | Pure acrylic dispersion - speciality coatings / packaging and wood adhesives / constructions adhesives and sealants. |
| Plextol™ R 123 | flüssig | Pure acrylic dispersion - decorative coatings / speciality coatings / construction adhesives and sealants. |
| Plextol™ R 1A | flüssig | Pure acrylic dispersion - packaging and wood adhesives. |
| Plextol™ R 5512 | flüssig | Pure acrylic dispersion - decorative coatings / speciality coatings / water proofing. |
| Plextol™ R 5530 | flüssig | Pure acrylic dispersion - decorative coatings. |
| Plextol™ R 803 | flüssig | Pure acrylic dispersion - decorative coatings / speciality coatings. |
| Plextol™ R 814 | flüssig | Pure acrylic dispersion - decorative coatings / speciality coatings. |
| Plextol™ R 815 | flüssig | Pure acrylic dispersion - speciality coatings |
| Plextol™ R 825 D | liquid | Pure acrylic dispersion, fine particle size, aqueous, ambient crosslinking, multiphase acrylic dispersion; offers high gloss potential, excellent wet adhesion and good blocking and scratch resistance; for speciality coatings, gloss and trim-paints. |
| Plextol™ R 825 N | flüssig | Pure acrylic dispersion, fine particle size, aqueous, ambient crosslinking, multiphase acrylic dispersion; offers high gloss potential, excellent wet adhesion and good blocking and scratch resistance; for speciality coatings, gloss and trim-paints. |
| Plextol™ R 826 | flüssig | Pure acrylic dispersion - speciality coatings |
| Plextol™ UltraFine LS 5000 | 35% | Pure acrylic dispersion, with an ultrafine particle size- for wood stains for interior and exterior application, barrier primers; excellent durability performance, excellent penetration and binding properties, gives good blocking resistance and adhesion on different wood types. |
| Plextol™ UltraFine PR 3500 | 30% | Pure acrylic dispersion - with an ultrafine particle size, APEO free; construction chemistry; for substrates priming; excellent penetration in porous substrates. |
| Plextol™ UltraGreen 3852 | 50% | Pure acrylic dispersion, APEO and ammonia free - applications: designed for the formulation of environmentally friendly low odour interior and exterior masonry coatings, satin/semi-gloss/silk paints, gloss paints-synthetic resin plasters; high water and alkali resistance, good binding power/capacity and excellent outdoor durability. |
| Plextol™ W 1078 | flüssig | Pure acrylic dispersion - for parquet and furniture |
| Plextol™ X 4002 | 59% | Aqueous, high solids dispersion of an acrylic ester copolymer, is an especially soft, cementcompatible pure acrylic dispersion, which is suitable as an elasticizing additive. Employment in cement containing systems such as flexible sealing compounds or flexible, water-resistant two-component building adhesives is typical. free from forming aids, solvents and plasticizer. |
| Plextol™ X 4427 | liquid | Pure acrylic dispersion, pressure sensitive adhesive, clear-transparent film, which is very soft and tacky at room temperature, adheres well to many kinds of materials. |
| Pliolite™ AC4 | Powder | styrene-acrylate copolymer, thixotropic resin soluble in various solvents, for facade paints, primers, concrete protection and corrosion protection systems; often used in combination with Pliolite AC80 for abrasion resistant, chemically resistant coatings with excellent UV and weathering resistance. |
| Pliolite™ AC5G | Powder | Styrene-acrylate-copolymer, thixotropic resin soluble in various solvents, for low to high build exterior masonry coatings, primers, concrete protection and anti-corrosion coatings; often used in combination with Pliolite AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. |
| Pliolite™ AC80 | Powder | Styrene-acrylate copolymer, newtonian resin soluble in various solvents, for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings; often used in combination with Pliolite AC4 or Pliolite AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. |
| Pliolite™ LV72 | Powder | Styrene-acrylate copolymer, newtonian resin for formulation of swimming pool paints and as a replacement for chlorinated rubber; forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance. |
| Pliolite™ VTAC-L | Powder | Toluene-acrylate copolymer, forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance, high solubility and film hardness; for formulation of flat or textured masonry coatings, alkali resistant primers, anticorrosion paints intumescent coatings and metal primers. |
| Pliotec™ 7104E | liquid | Aqueous styrene acrylate dispersion, with high Tg, excellent adhesion to concrete, outstanding abrasion and chemical resistance; formulation of floor coatings, primers for masonry and waterproofing sealers |
| Pliotec™ BR 10 | liquid | Pure acrlic dispersion - water-based modified acrylic binder recommended for dead-matt stain resistance applications, high hardness with good film formation at low VOC, fast hardness development, schnelle Härteentwicklung, superior adhesion on aged alkyds, masonry and wood surfaces , excellent scrub resistance, blocking resistance and hydrolysis stability. |
| Pliotec™ EL25 | | Aqueous styrene acrylate dispersion, excellent tensile/elongation properties, superior dirt pick-up resistance, UV resistance. and adhesion to concrete; elastomeric resin for vertical masonry coatings, roofing and tilt up coatings |
| Pliotec™ HDT12 | liquid | Aqueous styrene acrylate dispersion, modified styrene acrylic copolymer latex based on hydrophobic dispersion technology, excellent water resistance, corrosion protection and adhesion to metals; recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anti-corrosion primers. |
| Pliotec™ HDT16 | liquid | Aqueous styrene acrylate dispersion, fast hardness development, excellent water and corrosion resistance and outstanding adhesion to a wide range of substrates, for anti-corrosion paints, primers, Direct-To-Metal (DTM) coatings, multi-surface renovation paints |
| Pliotec™ LEB 20 | liquid | Aqueous acrylic dispersion, excellent dirt holding capacity, resistance to exudation (surfactant leaching) and efflorescence, strong early rain and colour retention; for exterior masonry coatings, topcoats for EIFS, all-weather paints |
| Pliotec™ PA05 | liquid | Aqueous acrylic dispersion, pure acrylic latex with high Tg, excellent resistance to water, UV and chemicals, very good adhesion to concrete; for high-performance coatings, concrete sealers, floor coatings for interior and exterior use |
| Pliotec™ SA40 | liquid | Aqueous styrene acrylate dispersion, excellent adhesion to concrete and outstanding resistance to alkali and efflorescence, forwater-based waterproofing sealers, masonry primers, and concrete cure-and-seal products |
| Pliotec™ SD 100 | liquid | Aqueous styrene acrylate dispersion, excellent water resistance and adhesion to primed metal; forms flexible, tough films with very good weather resistance and hydrolysis resistance; highly recommended for sound damping purposes, suitable for corrosion protection primers, APEO-free. |
| Plioway™ EC-T | Powder | Vinyl-acrylate copolymer, rheological resin, partially crosslinked, soluble in dearomatized aliphatic solvents, mainly used in combination with Plioway EC1, for low odour stain blocking primers, waterproofing sealers, correction fluids and intumescent coatings. |
| Plioway™ EC1 | Powder | Vinyl-acrylate copolymer, newtonian resin, soluble in dearomatized aliphatic solvents, excellent adhesion, as well as outstanding stain blocking properties, low odour, stain blocking primers, waterproofing sealers, correction fluids and intumescent coatings |
| Plioway™ Ultra 200 | Powder | Vinyl-acrylate copolymer, newtonian resin, soluble in isoparaffinic solvents, non-yellowing, tough coatings with excellent adhesion, for odourless stain blocking primers, basement water proofing sealers, correction fluids and intumecent coatings. |
| Plioway™ Ultra 350LV | Powder | Vinyl-acrylate copolymer, newtonian resin, soluble in isoparaffinic solvents, non-yellowing, tough coatings with excellent adhesion, for odourless stain blocking primers, basement water proofing sealers, correction fluids and intumecent coatings. |
| Plioway™ Ultra G20 | Powder | Vinyl-acrylate copolymer, pseudoplastic rheological resin, soluble in isoparaffinic solvents, used in combination with Plioway Ultra 200 or Ultra 350LV, for odourless stain blocking primers, basement water proofing sealers, correction fluids and intumecent coatings. |
| Polytone K-93 | pearls | Neutral, non saponifying ketone formaldehyde resin developed to improve the technological properties of paints, printing inks, adhesives etc. |
| Polytone K-94 | pearls | Neutral, non saponifying ketone formaldehyde resin developed to improve the technological properties of paints and printing inks (Flexo and gravure printing inks, ball point inks) etc. |
| Polytone K-95 | pearls | Neutral, non saponifying ketone formaldehyde resin developed to improve the technological properties of paints and printing inks (Flexo and gravure printing inks, ball point inks) etc. |
| Polytone K-96 | pearls | Neutral, non saponifying ketone formaldehyde resin developed to improve the technological properties of paints and printing inks (Flexo and gravure printing inks, ball point inks) etc. |
| Polytone K-97 | pearls | Neutral, non saponifying ketone formaldehyde resin developed to improve the technological properties of paints and printing inks (Flexo and gravure printing inks, ball point inks) etc. |
| Quartzene® Z2H1TP | Powder | Amorphous hydrophobic Silica-aerogel, low thermal conductivity, additive for thermally insulating coatings. |
| Quartzene® Z2TP | Powder | Hydrophobic Silica-Aerogel. Extremely low thermal conductivity. Additive for thermal insulating coatings. |
| REGAL® 250 R | Powder | Carbon black - lacquer / printing ink / plastic |
| REGAL® 400 R REGAL® 400 | Powder Pearls | Carbon black - lacquer / printing ink / plastic |
| REGAL® 660 R REGAL® 660 | Powder Pearls | Carbon black -Medium Color lacquer, printing ink, powder coatings, coloring leather articles, dispersions, Antistatic, low structure, high tinting strength, regular color printing black for liquid and powder systems |
| Resiflow CP 77 | Powder | Silicone free flow control agent with good anti-cratering effect. Also suitable for powder clear coats and UV systems. |
| Resiflow FK 70 | Liquid | Silicone free anti-floating and flow control agent for stoving paints. Eliminates craters, pinholes and fisheyes. No loss of hardness. |
| Resiflow FL 2 | Liquid | Silicone free acrylic flow control agent for solvent based and solvent free coatings based on alkyd, polyester, acrylic, vinyl, epoxy and polyurethane resin. |
| Resiflow FL 2-50 | Liquid | Silicone free acrylic flow control agent for solvent based and solvent free coatings based on alkyd, polyester, acrylic, vinyl, epoxy and polyurethane resin. |
| Resiflow FL 9 | min. 98 % | Silicone free acrylic flow control agent for solvent based and solvent free coatings based on alkyd, polyester, acrylic, vinyl, epoxy and polyurethane resin. Often better compatibility than FL 2. |
| Resiflow FM 4 | Liquid | Silicone free acrylic flow control agent for solvent based and solvent free coatings based on alkyd, polyester, acrylic, vinyl, epoxy and polyurethane resin. As Resiflow FL 2, but with improved efficiency. |
| Resiflow FM 4-50 | Liquid | Silicone free acrylic flow control agent for solvent based and solvent free coatings based on alkyd, polyester, acrylic, vinyl, epoxy and polyurethane resin. As Resiflow FL 2, but with improved efficiency. |
| Resiflow L-66 F | Liquid | Liquid functional flow control agent. Excellent transparency in TGIC-powder clear coats. Use via a master batch production. |
| Resiflow LH 241 | Liquid | Silicone free acrylic flow control agent for solvent based and solvent free coatings based on alkyd, polyester, acrylic, epoxy, polyurethan resins etc. Excellent compatibility, for crystal clear coatings. |
| Resiflow LH-240 | Liquid | Silicone free flow control and degassing additive for solvent based and solvent free formulations of different composition, including gel coats. |
| Resiflow LW | Liquid | Silicone free acrylic flow control agent for solvent based and solvent free coatings, similar to Resiflow FL 2 but lower in viscosity. |
| Resiflow P-64 F | Powder | Silicone free powder funcitonal flow control agent for powder-clear coats of all types, especially for GMA acrylate systems. Due to teh special carrier material the transparency is hardly reduced. |
| Resiflow PH-240 | Powder | Powder functional flow control agent with excellent flow without increasing "pill flow"; especially suitable for PU powder systems and PU clear coats. |
| Resiflow PL-200 | Powder | Silicone free powder flow control agent with good intercoat adhesion when recoated with powder or liquid paints. |
| Resiflow PL-220 | Powder | Silicone free powder flow control agent with good intercoat adhesion when recoated with powder or liquid paints. |
| Resiflow PV 88 | Powder | Silicone free, powder acrylic flow control agent for powder coatings of all types. Very free flowing and yellowing resistant.. As Resiflow PV 5, but on another silicate. |
| Resiflow W 51 | Liquid | Carboxy functional acrylic leveling Agent for aqueous and non-aqueous Systems. Complies with FDA 21 CFR 175.105, 175.300 and AP (2004) 1. |
| Resiflow W 52 | Liquid | Silicone free acrylic flow control agent for mainly water based coating systems as well as solvent based stoving systems (very good compatibility). Effective pigment wetting agent. |
| Resiflow W 5200 | Liquid | Silicone free polymer flow control agent, especially for aqueous coatings but also for solvent based systems. |
| Revacryl™ AE 2091 | flüssig | Aqueous styrene acrylate dispersion - water proofing, for use as elastifying component in cementitious mortars, flexible water-proofing membranes and 1C sealants. |
| Revacryl™ AE 3020 | flüssig | Styrene acrylate dispersion - speciality coatings / water proofing / construction adhesives and sealants, ceramic tile adhesives and mortar repair, for production of elastic coatings with high extensibility and low water absorption. |
| Revacryl™ AE 3723 | flüssig | Styrene acrylate dispersion - decorative coatings, construction applications, ideal for use in ceramic tile adhesive, mortar and primer applications. |
| Revacryl™ AE 3737 | flüssig | Styrene acrylate dispersion - speciality coatings, constructionapplications including membrane waterproofing applications, water-resistant tile adhesives, bondingbridges and primers. |
| Revacryl™ AE 4522 | flüssig | Styrene acrylate dispersion - decorative coatings / speciality coatings / water proofing / construction adhesives and sealants; Highly recommended for adhesion primer coatings e.g. for ETICS and mineral substrates, excellent wet adhesion, high blocking and water resistance, excellent saponifaction resistance. |
| Revacryl™ AE 6030 | flüssig | Styrene acrylate dispersion - speciality coatings |
| Revacryl™ DS 2100 | flüssig | Water based styrene acrylate dispersion - indoor matt paints, silk and semi-gloss paints, masonry facade paints; for interior and exterior coatings, good water resistance and saponification. |
| Revacryl™ DS 910 | 50% | Water based styrene acrylate dispersion - paints, coatings sealants, adhesives; for various paint application: matt interior paints, silk and gloss paints, interior and exterior textured coatings; wall and floor tile adhesives; high binding power, good water, alkali and saponification resistance. |
| Revacryl™ Design 1690 | liquid | Aqueous dispersion of an acrylic ester-styrene copolymer - for impregnation or coating applications of woven or non-woven textiles; can also be used for binding fibers or powdery materials of all types; self-crosslinking polymer; good bonding to mineral substrates like glass |
| Revacryl™ R 245 | flüssig | Styrene acrylate dispersion - decorative coatings |
| Revacryl™ R 387 | flüssig | Styrene acrylate dispersion - water proofing |
| Revacryl™ R 473 | flüssig | Styrene acrylate dispersion - construction adhesives and sealants |
| Revacryl™ R 478 | flüssig | Styrene acrylate dispersion - mortar |
| Revacryl™ UltraFine 4210 | 31% | Water based styrene acrylate dispersion - high penetration in mineral substrates, is an ideal product for production of primers and sealers, for exterior and interior application. |
| Revacryl™ UltraGreen 1876 | 50% | Ammonia free anionic stabilised aqueous dispersion of a styrene-acrylic copolymer, is free from film forming aids, solvents and plasticizers; suitable as binder in "solvent- and plasticizer-free" paints, for low-cost, but scrub-resistant wall paints; with a extraordinarily good pigment binding capability,suitable for high pH biocide-free coating formulations, meeting the requirements for RAL UZ 102 ("Blue Angel"), best suited for silicate paints, low water-uptake. |
| Revacryl™ UltraGreen DS 2800L | liquid | Ammonia free aqueous dispersion of a styrene-acrylic copolymer - is suitable for formulation of interior (matt and satin) and exterior paints with low-to-zero VOC that can meet most stringent environmental requirements (ex: Ecolabel, Blue Angel, Nordic Swan...); high pigment binding power excellent water and wet scrub resistance |
| Revacryl™ X 4308 | liquid | Aqueous emulsion of a self-crosslinking styrene-acrylic ester copolymer - Applications: Manufacture of edge strips and surface laminates for the furniture industry in combination with melamine- and ureaformaldehyde resins (as plasticizers); additional heat treatment (5 min at 140 °C) is required to obtain complete crosslinkage. |
| Revacryl™ X 9045 | liquid | Aqueous dispersion of an acrylic ester-styrene copolymer - used as cold blend component for foam adhesives and in adhesive compounds based on chloroprene, characterizedby good light and ageing resistance |
| Rohagit™ SD 15 | flüssig | Thickener - decorative coatings / speciality coatings / textiles & fibre bonding / mortar |
| Rohagit™ SD 9523 | flüssig | Thickener - textiles & fibre bonding / mortar |
| Schellack 4504 lemon 1 m.m. wachshaltig | flakes | Wax containing Shellac for wood and paper finishing, adhesives, varnishes and coatings.Allows formulating high solids, fast drying, water resistant inks and overprint varnishes. |
| Schellack 4505 TN wachshaltig | flakes | Wax containing Shellac for wood and paper finishing, adhesives, varnishes and coatings.Allows formulating high solids, fast drying, water resistant inks and overprint varnishes. |
| Schellack 4621 entwachst | flakes | Dewaxed Shellac, for wood and paper finishing, adhesives, varnishes and coatings.Excellent binder for packaging inks with good adhesion on plastics. |
| Schellack 4625 DO entwachst | flakes | Dewaxed Shellac, for wood and paper finishing, French polish, coatings and adhesives. Excellent binder for packing material printing inks with good adhesion on plastic. |
| Schellackwachs 44 | Pellets | Light brown, relatively hard wax, consisting of a mixture of esters (approx. 60%) and free alcohols (approx. 35%); versatile applications, paints, printing inks, leather and wood care products, shoe polishes and floor polishes, as well as use as a release agent |
| Sequapel® 409 | liquid | Aqueous hydrophobic acrylate copolymer for the formulation of waterproof coatings and binders; provides excellent water repellency and hold out properties to non wovens and textiles, and acts as a sizing agent for paper and paperboard. |
| Sinloihi F-10 Serie | Powder | Daylight Fluorescent Pigments with best lightfastness (addition of UVAbsorber) |
| Sinloihi FA 200LF | Powder | Daylight Fluorescent Pigments with good stability against various solvents (such as esters and ketones), suitable for applications such as paints and lacquers, gravure inks and screen inks; formaldehyde <300ppm. |
| Sinloihi FA 40 Serie | Dry Pigment | Daylight Fluorescent Pigments with good stability against various solvents (such as esters and ketones), suitable for applications such as paints and lacquers, gravure inks and screen inks. |
| Sinloihi FM 10 Serie | soluble toner | Soluble toner for solventbased flexo printing inks and ink as well as coating inks for polyester film. |
| Sinloihi FR-50 Serie | | Powder pigment for plasticized PVC, where resistance to heat and no color migration are required. |
| Sinloihi FX-300 Serie | Powder | Daylight Fluorescent Pigments providing excellent heat stability and and good solvent resistance, temperaturestable up to 260 °C, suiatble for plastics/masterbatch. |
| Sinloihi FZ-5000/6000 Serie | Dry Pigment | Standard powder Pigment, softening point 130–140 °C, suitable for various applications such as solventbased and waterbased paints and lacquers, silk screen ink and paper coating. |
| Sinloihi MLCB Serie | Dispersion | Formaldehyde free pigment dispersion free, having very fine particles, suitable for aqueous systems in indoorapplication. Under normal light these dispersions are invisible, only visible under ultraviolet light in Colors,green, red or blue. |
| Sinloihi SF-3000N Serie | Pigment dispersion in water | Formaldehyde free pigment dispersion, having very fine particles, suitable for water base flexo and gravure inks and inks. |
| Sinloihi SF-8000 Serie | Pigment dispersion in water | Formaldehyde free pigment dispersion with high viscosity, having very fine particles, suitable for water base ball points pen inks, gel inks, other waterbased inks. |
| Sinloihi SP-10 | Dispersion | Formaldehyde-free pigment dispersion, having very fine particles, in water, good lightfastness, heat stability and chemical resistance suitable for inks and paper coatings, without defoamer. |
| Sinloihi SW-100 Serie | Pigmentdispersion in water | Formaldehyde free pigment dispersion, having very fine particles, in water, good lightfastness, heat stability, chemical resistance and washability in textile uses, suitable for textile printing, padding & exhaust pigment dyeing. |
| Sinloihi SX-100 Serie | Powder | Daylight Fluorescent Pigments formaldehyde free, softening point > 200 °C, suitable for solventbased and waterbased paints and lacquers, printing inks and paper coatings. |
| Special-Primer PP 3200 W | 30 % in water | Aqueous adhesion promoter based on especially modified, low chlorinated polypropylene for PP, PE and polyolefinic blends. |
| Special-Primer PP 5130 | 2,5 % in xylene 5,0 % in xylene | Adhesion promoter for EPDM, PP and mixtures. |
| Special-Primer PP 7560 | 10 % in xylene | Adhesion promoter for EPDM, PP and mixtures, Compared to PP 5130 with improved adhesion promotion on different PP substrates and aluminium. |
| Special-Primer PP 7580 | 2,5 % in xylene | Adhesion promoter for untreated polypropylene for subsequent painting, printing, sticking, coating. For batteries, heels, toys, foils, garden furniture etc.. Best adhesion properties. |
| Synthomer™ ADS H190 | fest | Poly vinyle acetate; medium to high molecular weight performance polymer, application: solvent based adhesives, floorcovering, parquet flooring, heat activated adhesives; it rapidly dissolves in most organic solvents such as esters, ketones, aromatic hydrocarbons, lower alcohols and styrene. |
| Synthomer™ ADS H301 | fest | Poly vinyle acetate |
| Synthomer™ ADS H302 | fest | Poly vinyle acetate |
| Synthomer™ M30 | solid | Poly vinyle acetate |
| Synthomer™ M35/73 Solution | flüssig | Poly vinyle acetate |
| Synthomer™ M45 | solid | Poly vinyle acetate |
| Synthomer™ M50 | fest | Poly vinyle acetate |
| Synthomer™ M60 | fest | Poly vinyle acetate |
| Synthomer™ MCT5 | fest | polyvinyl acetate |
| Synthomer™ NX 795 | 100% | 2,2,4-Trimethyl-1,3-pentanediol-monoisobutyrate, Koaleszenzmittel für wässrige Dispersionen, klare, farblose Flüssigkeit; to achieve optimal film Formation, VOC-free |
| Synthomer™ NX 800 | 100% | 1-Isopropyl-2,2-dimethyltrimethylene diisobutyrate, Koaleszenzmittel für wässrige Dispersionen, klare, farblose Flüssigkeit; geruchsarm; zur Erzielung einer optimalen Filmbildung; VOC-frei |
| Thiocure® 320 | flüssig | Difunctional Polythiol, with low viscosity, as reactive thinner or flexibilizer in coatings, adhesives and sealants; more flexible than Thiocure® 340 and Thiocure® 330 because of lower crosslink density. |
| Thiocure® 330 | flüssig | Trifunctional Polythiol, with low viscosity and high reactivity for fast curing systems, more flexible than Thiocure® 340 because of lower crosslink density. |
| Thiocure® 331 | flüssig | Trifunctional Polythiol based on isocyanurate structure. Improved adhesion to metallic substrates and excellent reactivity in thiol-Ene-Systems and extremely high UV-resistance. |
| Thiocure® 332 | flüssig | Polyether-based tri-functional polythiol for use in flexible systems or as flexibilizer in combination with e.g. THIOCURE® 340 or THIOCURE® 330; compared to Thiocure® 333 less flexible but higher mechanical strength. |
| Thiocure® 333 | flüssig | Polymer-Polythiol, polyether-based tri-functional polythiol for higher flexibility compared to THIOCURE® 332; compared to Thiocure® 340/ 330/ 320 soft and more flexible, less reactive. |
| Thiocure® 340 | flüssig | Highly reactive, tetrafunctional polythiol with low viscosity, high crosslinking density for improved mechanical and chemical stability; standardtype for solvent and solventfree systems, is used as hardener or binder, reacts with Epoxy, Isocyanate and unsaturated compounds. When combined with epoxy resins low temperature curing systems can be formulated. Additive for fast curing in highsolid PU-systems. Binder for Thiourethane-systems and Thiol-Ene-systems (thermal or UV-curing). Additive for polysulfide sealants to increase the crosslink density. |
| Thiocure® 340L | flüssig | Odor-optimized version of the standardtype Thiocure® 340. |
| Thiocure® 340SL | flüssig | Version of Thiocure® 340 tailored for lower reactivity in combination with isocyanates; recommended for Isocyanate curing systems. |
| Thiocure® 341 | flüssig | Polycaprolactone-based tetra-functional polythiol, compared to Thiocure® 332 more reactive and flexible, better moisture and UV-resistance. |
| Thiocure® 360 | flüssig | Hexafunctional Polythiol, for very high crosslinking density, harder and higher glass transition temperature. |
| Thiocure® UV340-1 | liquid | Highly reactive, tetrafunctional polythiol, specially developed for use in radiation curing systems, exceptional stability, high crosslinking density, to reduce oxygen inhibition as well as volume shrinkage, to improve mechanical properties and chemical resistance, curing of very thick layers and also highly pigmented or highly filled systems. |
| Tipaque ET-Serie | - | Shearstable types suitable for lacquers, coatings, plastics, rubbers, fibers etc. Pigment is a spherical rutile type. |
| Tipaque FT-Serie | - | Pigments suitable for lacquers, coatings, plastics, rubbers, fibers etc. Pigment is a acicular type. |
| Tipaque R-980 | Pulver | Titandioxid, ease of Dispersion, excellent gloss and tinting strength due to its surface treatment with alumina and an organic compound, shows the unique blueish tone due to its slightly smaller particle size.; applications such as exterior paints where the maximum durability is reqired, interior paints, printing inks and plastics. |
| Tipaque TTO-55 (D) | Fluffy | Ultra-fine titanium dioxide, after-treated rutile pigment, hydrophilic, exhibits excellent transparency and offers extremely high UV-shielding capacity, high weather resistance, gloss stability as well as chalking resistance, is used e.g. for optical effects such as the so-called flipflop effect. |
| Tipaque TTO-Serie | | Rutiles TiO2-Pigment, hergestellt durch Kalzination und Fällungsverfahren. Nachbehandlung: ohne, Al2O3, Al2O3 + ZrO2 und teilweise organische Nachbehandlung. Die Primärteilchengröße ist 10–70 nm. Diverse Einsatzmöglichkeiten, u.a. für UV Schutz, für Frosteffekte und als Mischpigment für interessante klare Bunttöne. Als Eigenschaft bietet die TTO Serie gute Transparenz sowie guten UV-Schutz und eine spezielle selektive Reflektion und Streuung. |
| Tolonate™ D 2 | 75 % in aromat. hydrocarbon resin | Blocked aliphatic Polyisocyanate (HDI homopolymer) for 1K-systems, for weatherable coatings, it gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. Applications: Automotive OEM formulations, Can & Coil coatings, other General Industrial coatings on metal. |
| Tolonate™ HDB | 100 % | Aliphatic Polyisocyanate for 2K-systems; shows excellent outdoor durability, outstanding resistance to solvents, abrasion and chemicals; is delivered not diluted with any solvent, which gives a higher degree of formulation freedom. Applications: General Industrie, Protective coatings for car repair, Plastics, Wood. |
| Tolonate™ HDB-75 B | 75 % in butyl acetate | Aliphatic Polyisocyanates for 2K-systems, for weatherable coatings which give excellent mechanical properties, excellent adhesion and flexibility; Applications: General Industry, Marine & Protective, Wood. |
| Tolonate™ HDB-75 M | 75% in methoxypropyl acetate | Aliphatic Polyisocyanate for 2K-systems, for weatherable coatings which give excellent mechanical properties, excellent adhesion and flexibility. Applications: General Industry, Marine & Protective, Wood. |
| Tolonate™ HDB-75 MX | 75 % in MPA/Xylol | Aliphatic Polyisocyanate for 2K-systems, for weatherable coatings which give excellent mechanical properties, excellent adhesion and flexibility. Applications: General Industry, Marine & Protective, Wood. |
| Tolonate™ HDB-LV | 100 % | Low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer) for high solid 2K-systems and varnishes and solvent-free polyurethane systems, shows excellent outdoor durability, outstanding resistance to solvents, abrasion and chemicals, high flexibility. Applications: General Industrial, Plastics and Wood Applications, Marine & Protective, Adhesives. |
| Tolonate™ HDT 90 B LM | 90% in butyl acetate | Aliphatic Polyisocyanate for 2k-systems, it shows excellent outdoor durability, outstanding resistance to solvents, abrasion and chemicals. Applications: Automotive OEM & Refinish, General Industry, Transportation, Plastics. |
| Tolonate™ HDT LM | 100 % | Aliphatic Polyisocyanate for 2k-systems showing excellent outdoor durability, hardness and outstanding resistance to solvents, abrasion and chemicals. Applications: Automotive OEM & Refinish, Industrial Machinery, Plastic parts; is delivered not diluted with any solvent, which gives a high degree of formulation freedom. |
| Tolonate™ HDT-90 LM | 90 % in butyl acetate/aromatc hydrocarbon resin | Aliphatic Polyisocyanate for 2K-systems, shows excellent outdoor durability and outstanding resistance to solvents, abrasion and chemicals. Applications: Automotive OEM & Refinish, General Industry, Plastic Coatings, Marine & Protective, Transportation. |
| Tolonate™ HDT-LV 2 | 100 % | Solvent-free, very low viscosity Polyisocyanate for 2k-systems, hydrophobic; excellent weather resistance, adhesion, heat and humidity resistance. Applications: Aerospace coatings, Automotive Refinish, Construction, Plastics. |
| Tolonate™ HDT-LV LM | 100 % | Low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer for 2K-systems, hydrophobic; excellent weather resistance, adhesion, heat and humidity resistance. Applications: Aerospace coatings, Automotive Refinish, Construction, Plastics. |
| Tolonate™ X DH5 | liquid | Blocked aliphatic Polyisocyanate (HDI homopolymer) for 1K-systems, for weatherable coatings, it gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. Applications: Automotive OEM formulations, Can & Coil coatings, other General Industrial coatings on metal. |
| Tolonate™ X F 450 | 100 % | Low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate (HDI) for 2K systems, aliphatic polyurea and polyaspartic systems; benefits: high flexibility while maintaining high hardness, longer pot-life. Applications: protective coatings and flooring, adhesives, construction. |
| Tolonate™ X F 800 | 100 % | Low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate (HDI) for 2K systems, aliphatic polyurea and polyaspartic systems. Benefits: excellent impact resistance, flexibility and adhesion, high scratch resistance. Applications: General Industry, Construction, Marine & Protective. |
| Tolonate™ X FLO 100 | 100 % | Partially bio-based, solvent-free, extremely low viscosity aliphatic isocyanate polymer, based on Hexamethylene Diisocyanate (HDI); for 2k-systems and moisture-curable 1K-systems, contains 25% renewable material; benefit: unique flexibility and tensile properties, low viscosity, increased hydrophobicity along with lower toxicity. Applications: coatings, adhesives, sealants, plastics, TPU. |
| VULCAN® PF VULCAN® P | Powder Pearls | Carbon black - antistatic |
| VULCAN® XC72 | Pearls | Carbon black - antistatic; a multi-purpose conductive carbon black typically used in power cables and electrostatic dissipation (ESD) applications with loadings between VULCAN XC605 and XCmax. |
| VULCAN® XC72 R | Powder | Carbon black - antistatic; delivering high conductivity at relatively low loading levels, this fluffy carbon black provides good chemical and physical cleanliness and good processability, as well as low sulfur content and ionic contamination. In addition to conductivity, it will allow a high level of jetness to be obtained in the application. |
| VULCAN® XCmax 22 | Pearls | Carbon black - antistatic; most conductive carbon black designed for conductive applications where very low loadings of carbon black is required. |
| Worlée 4505 SOLW | 29-31% | Shellac (wax containing) dissolved in aqueous potassium hydroxide solution, dark solution. |
| Worlée 7730 SOLL | ca. 49% | White bleached shellac (dewaxed) in Ethanol, yellowish-orange solution. |
| Worlée 7730 SOLW | ca. 25% | White bleached shellac in aqueous potassium hydroxide solution; yellowish-orange solution |
| WorléeAdd 100 | Liquid | Silicone free, polymeric, flow control agent for solvent based and solvent free coatings, good recoatability, avoids surface imperfections. |
| WorléeAdd 101 | Liquid | Silicone free acrylic flow control agent for solvent based and free coatings and printing inks of different composition. Avoids also surface imperfections. |
| WorléeAdd 1200 | Powder | Micronized synthetic wax improving slip properties and mar resistance and deaering of powder coatings. In higher concentrations also acting as matting agent. |
| WorléeAdd 312 | Liquid | Multi functional, Silicone based additive to improve Surface slip and mar resistance, especially those free from aromatic compounds. |
| WorléeAdd 315 | Liquid | Silicone based additive for water and solvent based paints, improving mar resistance and slip, flow and gloss. |
| WorléeAdd 327 | Liquid | Silicone based additive to improve Surface slip and mar resistance of solvent borne formulations. |
| WorléeAdd 330 | Liquid | Silicone based; reduce surface tension of water thinnable systems, improve levelling, reduce edge pulling, eliminate surface imperfections. |
| WorléeAdd 3410 | Liquid | Silicone based Substrate wetting Agent for use in all air drying, aqueous industrial, automotive, Wood and decorative Coatings and 2-pack PUR Systems. |
| WorléeAdd 3440 | Liquid | Silicone based Substrate wetting Agent to reduce the Surface Tension of aqueous Systems. |
| WorléeAdd 3450 | liquid | Additive to reduce the surface tension of water dilutable and radiation curing paint systems |
| WorléeAdd 351 | Liquid | High molecular silicone additive to improve slip, mar resistance and antiblocking. |
| WorléeAdd 352 | Liquid | Highly effective high molecular silicone additive to improve Surface slip, mar and abrasion resistance of aqueous and water thinnable formulations. Improves blocking resistance significantly. |
| WorléeAdd 3520 | Liquid | High molecular silicone additive for aqueous and water thinnable systems |
| WorléeAdd 3530 | Liquid | High molecular silicone additive for water thinnable printing inks and overprint varnishes |
| WorléeAdd 356 | Liquid | Multifunctional, heat resistant silicone additive for solvent borne systems. |
| WorléeAdd 3585 | Liquid | Silcone based Surface additive for use in aqueous and non-aqueous paints and Coatings, printing inks and overprint varnishes including UV curing Systems. |
| WorléeAdd 370 | Liquid | Fluor silicone based defoamer and deairing agent for solvent based paints and inks of different compositions as well as for EP coatings. |
| WorléeAdd 372 | Liquid | Fluor silicone based defoamer and deairing agent for solvent based coatings, especially for industrial coatings. Also for high solids. |
| WorléeAdd 373 N | Liquid | Silicone based additive with multifunctional properties. It is used in wood glazings, lacquers, silk gloss paints etc. mainly to achieve surface smoothness and mar resistance. At the same time it works as antifoam agent and avoids surface imperfections. |
| WorléeAdd 410 N | Liquid | Viscosity stabilizer, anti skinning and anti-gelling agent for solvent based air drying and stoving alkyd paints. |
| WorléeAdd 411 N | Liquid | Viscosity stabilizer, anti skinning and anti-gelling agent for solvent based air drying and stoving paints. Like W´Add 410 N but aromatic free. |
| WorléeAdd 412 | Liquid | Solvent free compatibility agent for easier incorporation of driers into water based alkyd emulsion paints. |
| WorléeAdd 4220 | Liquid | Cationic Surface active additive to improve the conductivity of Systems for electrostatic spray application. Requires only low dosages. |
| WorléeAdd 425 | Liquid | Silicone free antifoam agent and defoamer for solvent borne and solvent free Systems. Perfectly suitable for wax containing coil coating structure paints and 2 component EP floor coatings. |
| WorléeAdd 429 | Liquid | Silicone containing surface additive with multi functional properties for solvent based, matted formulation. Supports raising and orientation of silica based matting agents and improves the matting effects. Supports deairing, too. |
| WorléeAdd 4415 | Liquid | Oxime-free antiskinning Agent with pigment wetting properties |
| WorléeAdd 456 | Liquid | Nitrite-free, organic anti-flash rust agent and corrosion inhibitor for aqueous paints and lacquers. VOC free. |
| WorléeAdd 458 | Liquid | Nitit-free anti-flash rust agent for aqueous paints and lacquers. |
| WorléeAdd 480 N | Liquid | Special epoxy ester to improve the adhesion of aqueous baking enamels and polyurethane systems on metallic substrates. |
| WorléeAdd 4820 | Liquid | Isocyanate functional Polyester to improve the adhesion of solvent-borne and -free polyurethane systems on glass, tile and metals. |
| WorléeAdd 484 | Flüssig | Reactive adhesion promoter for the adhesion improvement of solvent based and solvent free two pack - polyurethane systems on different substrates. |
| WorléeAdd 487 | Liquid | Reactive adhesion promoter for air-drying, stoving and 2-pack PUR Systems. Improves the adhesion on metals. Thermo stable up to approx. 180 °C. Does not contain n-methyl-2-pyrrolidone. |
| WorléeAdd 6223 | Flüssig | Silicone based defoamer formulation for aqueous Systems. Concentrate to avoid air entrapment during production and application. |
| WorléeAdd 6226 | 100 % | Silicone based grind defoamer for aqueous Systems. Concentrate to avoid air entrapment during production and application. |
| WorléeAdd 6235 | Flüssig | Polyacrylate modified Silicone defoamer for non-aqueous Systems of various composition, especially suitable for epoxy Systems, particularly for flooring Systems. |
| WorléeAdd 6236 | Liquid | Polyacrylate modified Silicone defoamer for solvent borne and solvent-free Coatings of various composition, especially for PUR Systems. |
| WorléeAdd 628 | Flüssig | Silcone based defoamer for queous Systems for use in grind and let-down stage. Very well working in airless applications. |
| WorléeAdd 6410 | Flüssig | Silicone based defoamer emulsion for aqueous systems. Very good compatibility, for use in water borne and water thinnable paints, coatigs, printing inks and similar Systems. Very effective in formulations based on alkyd Emulsion, PU-dispersions and hybrid Systems. |
| WorléeAdd 6420 | Liquid | Silicone containing defoamer Emulsion for aqueous Systems. Very good compatibility, particularly for use in water borne and water thinnable printing inks, but also for paints, Coatings and similar Systems. Very effective in alkyd emulsions, PU-dispersions and hybrid Systems. |
| WorléeAdd 781 | Liquid | Silicone free additive for solvent based, solvent free and water based systems to improve levelling, flexibility and adhesion. 2 component-PUR coatings of high film thickness show reduced blistering. |
| WorléeAdd 810 | fine powder | Organic derivative of a smectite; Rheology control in systems with low polarity. |
| WorléeAdd 820 | fine powder | Organic derivative of a smectite; Rheology control in systems with low to medium polarity. |
| WorléeAdd 827 | fine powder | Organic derivative of a smectite; Rheology control in systems with high polarity. |
| WorléeAdd 830 | fine powder | Ultrapure smectite; Rheology control in water-based systems |
| WorléeAdd 840 | fine powder | Organically modified smectite derivate; Rheology control in systems with no polarity to medium polarity. |
| WorléeAdd 845 | fine powder | Organically modified smectite derivate; Rheology control in systems with no polarity to medium polarity. |
| WorléeAdd 850 | fine powder | Organically modified smectite derivate; Rheology control in systems with low polarity. |
| WorléeAdd 860 | fine powder | Organically modified smectite derivate; Rheology control in systems with no polarity to medium polarity. |
| WorléeAdd 875 | fine powder | Organically modified smectite Derivate. Rheology control in water-based systems. |
| WorléeAdd 880 | fine powder | Organically modified smectite derivate; Rheology control in systems with no polarity to medium polarity, activator free. |
| WorléeAdd 885 | fine powder | Organically modified smectite Derivate. Rheology control in water-based systems. |
| WorléeAdd 8905 | Liquid | Alkaline ZnO-solution for crosslinking water based carboxy functional acrylic polymers to increase the water resistance, optimize the block resistance, increase the heat stability and maximise the film hardness. |
| WorléeAdd 902 | Powder | For reducing the melt viscosity, thus improving deairing and degassing. Best results in combination with very low amounts of benzoine (0.1-0.2 %). Especially suitable for non-yellowing powder coatings, for instance when cured in gas fired ovens. |
| WorléeAdd 904 | Granulate | For reducing the melt viscosity, thus improving deairing and degassing. Best results in combination with very low amounts of benzoine (0.1-0.2%). |
| WorléeAdd 915 | Powder | Catalyst to improve the mechanical properties of GMA-acrylic powder systems, based e.g. on Isocryl EP-570. |
| WorléeAdd FR 5000 | 100% | Halogen free flame retardant, based on encapsulated phosphoric compounds for water based polymer dispersions (anionic and cationic) and solvent based polymer binders. Provides effective flame protection to coating systems and polymeric materials.Due to the encapsulation of the active substance (ammonium polyphosphate) it has an extremely low water solubility. This has the advantage of avoiding the risk of wash-out due to environmental influences. The flame retardancy will not be affected in the long term. |
| WorléeAdd ST-70 | Powder | Stannous octoate catalyst for PU powder coatings. |
| WorléeAdd VP 3540 | Liquid | Multifunctional, thermo stable silicone additive for solvent based systems |
| WorléeBlackpaste S | flüssig | Transparent, solvent based carbon black preparation for wood stains, Meko-free. |
| WorléeBlackpaste SF-AK | flüssig | Transparent carbon black pigment preparation based on solvent free binders. Meko-free. |
| WorléeBlackpaste W | flüssig | Transparent, waterbased carbon black preparation for wood stains. |
| WorléeCop 100 | flüssig | Styrene butadiene latex |
| WorléeCryl 7107 | 40% in water | As mixing component W´Cryl 7107 is universally suitable for improving film harndess, sandability, blocking resistance and stackability. |
| WorléeCryl 7120 | 49% in water | Corrosion inhibiting primers on different metals (e.g. iron, aluminium), good weather resistance. |
| WorléeCryl 7123 | 60 % in water | High flexible roof coatings, sealing compounds, adhesives. Excellent weather resistance. |
| WorléeCryl 7126 | 62 % in water | High solid acrylic dispersion for the formulation of colourless joint sealers. |
| WorléeCryl 7135 | 42% in water | Topcoats on metal, wood, plastics (PS, ABS). Also for temporary anti-corrosive primers on metal, can be combined with water thinnable alkyd resins. |
| WorléeCryl 7137 | 42 % in water | Allround emulsion for top coats on plastic, metal, wood and for corrosion inhibiting primers with very good adhesion on steel and low water absorption. |
| WorléeCryl 7158 | 49% in water | Self-crosslinking styrene modified acrylic emulsion for primers with excellent results in corrosion protection tests. |
| WorléeCryl 7189 | 49% in water | Flexible binder for wall paints, tiles and building adhesives. Fast setting, high initial adhesion, highly flexible. |
| WorléeCryl 7410 | 45% in water | Self-crosslinking acrylic polymer for the formulation of aqueous furniture lacuqers with good resistance against household chemicals. |
| WorléeCryl 7450 | 45 % in water | Good blocking stability, in combination with PU-dispersion wood, parquet lacquers and top coats for wood can be formulated. |
| WorléeCryl 7462 | 55% in water | Aqueous pure acrylic dispersion for the formulation of high-gloss emulsion paints. |
| WorléeCryl 7520 | 50% in water | For manufacturing dispersion paints for indoor and outdoor application and coloured quartz sand plaster. |
| WorléeCryl 7712 H | 40% in water / methoxy propanol | WorléeCryl 7712 H is excellent suitable as binding agent for fillers respoctively as colourless or pigmented sealing primer on wood with a high content of soluble wood ingredients. |
| WorléeCryl 7712 W | 26 % in water (7712 W) | Filler and colourless sealants for wood. Excellent isolating against bleeding, pigmented and transparent. Nicotine insulating paints. |
| WorléeCryl 7745 | 45% in water | Aqueous cationic acrylate copolymer dispersion |
| WorléeCryl 7750 | 45% in water | Aqueous cationic acrylate copolymer dispersion |
| WorléeCryl 7755 | 40% in water | Aqueous cationic acrylate copolymer dispersion |
| WorléeCryl 8025 | 25 % in water | Grinding vehicle with a wide range of compatibility. |
| WorléeCryl 8025 M | 25 % in water | MEA-neutralized grinding vehicle with a wide range of compatibility. |
| WorléeCryl 8040 | 40 % in water/IPA | Enhances adhesion of inks and overprint varnishes to a wide range of substrates. |
| WorléeCryl 8043 | 40 % in water/IPA | Excellent binder for gloss inks due to it?s effectiveness at low concentrations. |
| WorléeCryl 8060 | 40 % in water | Grinding vehicle with a wide range of compatibility. |
| WorléeCryl 8263 | 52 % in water | For heat-seal-resistant, high gloss overprint inks, storage stable with metallic pigments. |
| WorléeCryl 8273 | 45 % in water | Dispersion for manufacture high gloss overprint varnishes. |
| WorléeCryl 8290 | 45 % in water | For flexographic rotogravure inks and overprint varnishes. |
| WorléeCryl 8410 | 40 % in water | For flexo-/gravure inks with good gloss, flexible. |
| WorléeCryl 8470 | 25 % in water | Very hard polymer, very good compatible with acrylic emulsions, mod. natural resins and amino resins. |
| WorléeCryl 8545 | 50 % in water | W´Cryl 8545 is an APEO-free polymer emulsion which is used as a main component in a blister formulation. Excellent sealing properties and a good compatibility with harder acrylic emulsions are furtehr properties. |
| WorléeCryl 8721 | 30 % in water | Cationic acrylic solution with excellent alkali resistance. |
| WorléeCryl A 1135 | 60 % in xylene | W´Cryl A 1135 is an acrylate copolymer for the manufacture of industrial paints with very good resistance against water and other agents. |
| WorléeCryl A 1218 | 50 % in BAc 98/100 | High reactivity and long pot life. For fast drying wood and furniture lacquers. CAB compatible. |
| WorléeCryl A 1220 | 60 % in Bac 98/100 | W´Cryl A 1220 is an acrylate copolymer for the manufacture of high quality plastic coatings. |
| WorléeCryl A 1320 | 50 % in Bac 98/100 | For high quality wood and furniture lacquers, good initial drying. |
| WorléeCryl A 2116 | 60 % in aromatic HC 155-180 | For fast drying industrial paint with good gloss. Also for decorative paints - in combination with W´Thix A 2125 - for effect finishes. |
| WorléeCryl A 2130 | 60% in X/Bac/aromat. HC 155-180 | For two component industrial paints with good mechanical properties and high gloss with good outdoor durability. |
| WorléeCryl A 2141 | 70 % in Bac 98/100 | For high quality air and forced drying paints on metal, wood and plastics. |
| WorléeCryl A 2210 | 60 % in aromatic HC 155-180 | For fast drying primers, recoatable at any time (among other things with two component finishing lacquers) adhesion on critical substrates. |
| WorléeCryl A 2218 | 50 % in X/BAc (9:1) | For air and forced drying two component primers, fillers and top coats with excellent adhesion on steel and aluminium. |
| WorléeCryl A 2230 W | 44% in water / solvent blend | W´Cryl A 2230 W is a water emulsified hydroxyacrylate for the production of exterior resistant isocyanate cross-linked two component top coats with outstanding drying properties, film hardness and gloss. |
| WorléeCryl A 2241 W | 45 % in water / solvent blend | W´Cryl A 2241 W is a water emulsified hydroxyacrylate for the production of isocyanate cross-linked exterior resistant two component top coats which exhbiit long pot-life, high gloss and good adhesion properties. |
| WorléeCryl A 2335 | 60% in xylene / n-butylacetate /Solvesso 100 | For formulating high quality air and forced drying top and clear coats. Fast hardness development and very good adhesion for different metals. |
| WorléeCryl A 2445 | 60 % in X/Bac/aromat. HC 155-180 60 % in aromat. HC 155-180 | For high quality industrial and machine paints; also for car repair finishes with excellent uv-stability. |
| WorléeCryl A 5125 W MF | 42% in water | Hydroxy functional aqueous acrylic resin |
| WorléeCryl CH-X-2158 | 61% in Wasser | High solid acrylate dispersion, highly flexible, for thermal insulating coatings (WorléeShield technology)(e.g safe-touch, anti-condensation, insluation), easy incorporation of voluminous insulation fillers such as hydrophobic aerogels, high elasticity (CH-X-2159 > CH-X-2158) even at low temperatures, good water resistance and adhesion to various substrates, combination of both binders with WorléeAdd 8905 allows sprayable coatings, crackfree even in thick films, optional flame retardant properties with WorléeAdd FR 5000. |
| WorléeCryl CH-X-2159 | 59% in Wasser | see below WorléeCryl CH-X-2158 |
| WorléeCryl L 2380 | 50 % in dearomat. HC 160-200 | Physically drying thermoplastic acrylic resin for different coatings systems improving hardness and gloss. |
| WorléeCryl L 241 | 60 % in isoparaffin. HC 170-200 | Neutral low odour acrylic resin, mainly for wall and ceiling paints, very good insulating coat for nicotine-, chimney- and water spots, for chlorine free formulations, without plasticizer. |
| WorléeCryl L 2580 | 70 % in isoparaffin. HC 170-200 | Neutral, soft, low odour acrylic resin mainyl used for wall and ceiling paints, low VOC. Very good insulating coat for nicotrine, chimney and water spots. |
| WorléeCryl L 2822 | 70% in dearomat. HC 160-200 75% in xylene | Self crosslinking thermoplastic acrylic copolymer for modification of low VOC alkyd lacquers. It accelerates drying and improves film hardness, in addition gloss and gloss retention can be optimised. |
| WorléeCure VP 2270 | 100% | Epoxy curing agent based on a polyamine adduct; used as universal curing agent for laminating- and coating resin systems as well as for highly filled coating materials, motars and primers and epoxy flooring systems. |
| WorléeDex 1177 | 40 % in water | Amine and ammonia free copolymer for fast drying flexo printing inks on paper and cardboard. Very good compatibility with aqueous acrylic polymers. |
| WorléeDex 1182 | 50 % in water | Amine and ammonia free copolymer for fast drying flexo printing inks on thin papers and cardboards. |
| WorléeDisperse 8100 S | Liquid | Polymeric dispersant for inorganic and organic pigments in non-aqueous formulations. For direct grind and pigment concentrates. |
| WorléeDisperse 8400 W | Liquid | Polymeric dispersing agent for inorganic and organic pigments in aqueous formulations. For direct grind and high loaded pigment concentrates. |
| WorléeDisperse 8405 W | Liquid | Polymeric wetting and dispersing agent for inorganic and organic pigments in aqueous formulations. For direct grinding of mixed pigmentations and highly loaded Pigment concentrates.Optimized for micronized iron oxide pigments. |
| WorléeDisperse VP 8470 W | Liquid | Polymeric dispersing Agent for aqueous formulations. Preferably for direct grinding of organic pigments and for the preparation of high loaded concentrates of organic pigments. |
| WorléeDur D 46 | 60 % in xylene | High quality zinc rich and anti corrosive paints, airdrying and stoving primers and top coats, fast drying and excellent water resistance. |
| WorléeDur D 6311 | 60% in dearomat. HC 140-165 60% in ws 145-195 60% in dearomat. HC 160-200 | Universal adhesion and anti corrosion primer and one coat paints. Very good adhesion even on difficult substrates. |
| WorléeDur MF 45 | 60 % in xylene | Zinc rich and anti corrosive paints with excellent water resistant and rust preventing, good brushability. |
| WorléeFen F 105 | 100 % | General purpose type for alkyd based paints and primers.Low viscous resin giving excellent gloss and rub resistance on cold set inks. |
| WorléeFen F 120 | 100 % | General purpose type for alkyd based paints and primers and for cooking with alkyds.Fast setting, high gloss resin for sheetfed inks. Compatible with alkyds and natural inks. |
| WorléeFen F 130 | 100 % | Cold cut modifying resin for paints with good drying properties and high gloss. |
| WorléeKyd AC 2550 AC 2551 | 60 % in ws 135-175 (AC 2550) 60 % in xylene (AC 2551) 60 % in dearomat. HC 140-165 | Acrylated alkyd resin for extremely fast drying primers and top coats. |
| WorléeKyd AC 2943 | 75 % in butyl acetate 75% in xylene | Acrylated low viscous alkyd resin for high solid primers. |
| WorléeKyd B 4901 B 4901 nv | 75% in deraromat. HC 160-200 / methoxypropanol 50% in dearomat. HC 160-200 | Fast drying, for air and forced drying industrial, vehicle and machine paints as well as dearomat. D.I.Y. and radiator paints. |
| WorléeKyd B 6301 | 90 % in dearomat. HC 180-220 98-100 % | Low viscous airdrying long oil alkyd resin for decorative and house paints, Low VOC. |
| WorléeKyd B 845 | 55 % in ws 145-195 70 % in xylene | Fast drying radiator paints, automotive and machinery refinishing enamels with good gloss. "Laroflex" (BASF) compatibility. |
| WorléeKyd B 850 U | 50 % in ws 145-195/X | Extremely fast drying, urethane modified for primers and topcoats, good recoatability. |
| WorléeKyd B 865 B 865 nv | 60 % in ws 145-195 65 % in dearomat. HC 160-200 (nv) | High quality house, decorative and d.i.y. paints with good flow, high gloss, good outdoor resistance. |
| WorléeKyd B 865 U | 55 % in ws 145-195 55 % in isoparaffin. HC 170-200 55 % in dearom. HC 180-220 55 % in dearom. HC 160-200 | Urethane modified, for wood varnishes, floor coatings and industrial primers and top coats. |
| WorléeKyd B 865 U nv | 60 % in dearomat. HC 180-220 | Urethane modified, for wood varnishes, floor coatings and industrial primers and top coats. |
| WorléeKyd B 868 | 70 % in dearomat. HC 160-200 | High quality gloss paints, excellent brushability, gloss retention and good drying properties. |
| WorléeKyd B 870 | 75 % in isoparaffin. HC 170-200 75% in dearomat. HC 160-200 75% indearomat. HC 180-220 | House paints with good brushability, high film build, good flow and excellent gloss retention. |
| WorléeKyd BS 5005 | 80 % in dearomat. HC 160-200 | Silicone modified alkyd resin as sole binder or in combination with conventional medium and long oil alkyd resins for the manufacture of high quality, high solid industrial and houzse paints. low VOC |
| WorléeKyd BS 830 | 60% in ws 60% in isoparaffin. HC 170-200 60% in dearomat. HC 160-200 | Silicone modified alkyd resin for high quality industrial and maintenance paints with very good drying properties, high gloss retention and corrosion resistance. |
| WorléeKyd BSA 5015 | 85% in deraomat. HC 160-200 | Low viscous, air drying, especially modified alkyd resin with good resistance properties for decorative and house paints, low VOC. |
| WorléeKyd BT 5001 | 65% in dearomat. HC 160-200 | Fast drying alkyd resin for low VOC house paints and dearomatized machine-, industrial and D.I.Y. paints. |
| WorléeKyd C 628 | 70 % in xylene | High quality non yellowing stoving enamels, NC- and PU-coatings, colourless and pigmented. OH-cont. (on solids) 2,0-2,4 %. |
| WorléeKyd C 632 M | 65 % in butylacetate | NC-lacquers with properties as acid curing systems but without formaldehyde. Aromatic free. Hydroxyl content (on solids) 2,7- 3,3 %. |
| WorléeKyd C 640 | 60 % in xylene | NC-lacquers with fast solvent release, good yellowing resistance and recoatability for paper and wood. |
| WorléeKyd C 641 | 80 % in butyl acetate | High quality NC lacquers and one component acid curing finishes with high film build and fast solvent release, for wood, foil and paper. |
| WorléeKyd CD 32 | 60% in xylene | Im combination with suitable amino resins for very reactive primers and top coats with good storage stability. Crosslinking with isocyanate is also possible. OH content (solids) = 2.6 - 3.0. |
| WorléeKyd E 55 | 70 % in ws 145-195 70 % in dearomat. HC 160-200 | In comb. with medium oil alkyds for high quality car repair finishes and industrial paints. |
| WorléeKyd FC 555 | 50 % in isoparaffin. HC 170-200 | Fast drying, low odour and dearomatized radiator and d.i.y. paints with high gloss and good yellowing resistance. |
| WorléeKyd L 138 | 60 % in xylene | Phenolic modified, for fast drying primers and top coats, putties and fillers. |
| WorléeKyd L 3 | 100 % | Pigment binder in coldset ink systems. |
| WorléeKyd L 7904 | 98 - 100 % | High solid clear lacquers,wood glazings, and high solid primers. |
| WorléeKyd L 8004 | 98-100% | Low viscous linseed oil modifiedalkyd resin for wood glazings, low VOC. |
| WorléeKyd LH 3702 | 50 % in dearomat. HC 160-200 | Dearomatised airdrying base and top coats. |
| WorléeKyd M 932 | 60 % in xylene | Stoving primers and topcoats with high reactivity and good mechanical properties. Excellent viscosity stability. Stoving cond. 100-140 °C. |
| WorléeKyd MH 38 | 60 % in xylene | Primers and top coats, good elasticity and resistance properties. |
| WorléeKyd MH 42 | 60 % in ws 135-175 60 % in dearomat. HC 140-165 | Allround type alkyd for primers and topcoats, very good "Laroflex" (BASF) compatibility. |
| WorléeKyd MH 439 | 60 % in xylene 60 % in ws 135-175/Solv. PM | Phenolic modified, fast drying primers and top coats, "Laroflex" (BASF) compatibility. |
| WorléeKyd P 151 | 100 % | Low viscous, for high conc. pigment preparations. Very good compatibility properties. |
| WorléeKyd RM 232 | 60 % in xylene | Stoving primers and topcoats with medium reactivity and good mechanical properties. Stoving conditions: 10 min. 160°C or 30 min./130°C |
| WorléeKyd RS 2174 | min. 98 % | Combination resin for other alkyd resins. Improving epentration, decreasing viscosity, VOC reduction. Sole binder for wood care and coating products. |
| WorléeKyd S 23 | 100 % | Good pigment wetting, fast setting alkyd for heatset inks. |
| WorléeKyd S 3001 | 75% in xylene / Solvenon PM 8:2 | Low viscous, fast drying alkyd resin for manufacturing low VOC industrial primers and top coats. |
| WorléeKyd S 351 | 60% in dearomat. HC 180-220 | White undercoatings, semi gloss enamels with good flow properties. |
| WorléeKyd S 351 nv nv | 60 % in isoparaffin. HC 170-200 | Undercoatings, silk gloss and matt enamels with good flow. |
| WorléeKyd S 549 | 55 % in ws 145-195 55 % in ws 135-175 | Fast drying automotive and machinery refinishing enamels. |
| WorléeKyd S 6003 | 51 % in dearomat. HC 160-200 50 % in isoparaffin HC 150-180 | For wood varnishes, floor coatings and industrial primers and top coats. Faster drying and harder film properties than B 865 U. |
| WorléeKyd S 6003 hv | 50 % in dearomat. HC 160-200 | For wood varnishes, floor coatings and industrial primers and top coats. Even faster drying than S 6003. |
| WorléeKyd S 6400 hv | 60 % in dearomat. HC 160-200 60 % in dearomat. HC 180-220 | Consumer, decorative, d.i.y. and anticorrosive paints. |
| WorléeKyd S 7304 | approx. 100 % | Low viscous, airdrying, long oil alkyd resin for decorative and house paints, low VOC. |
| WorléeKyd SB 6401 | 90 % in dearomat. HC 180-220 | Low viscous, air drying, long oil alkyd resin for decorative and house paints, low VOC. |
| WorléeKyd SC 965 | 70 % in dearom. HC 180-220 | High quality house paints, very good brushability, good flow and levelling, high gloss. |
| WorléeKyd SD 6403 | 55 % in dearomat. HC 160-200 | Special urethane modified alkyd resin with good adhesion properties e.g. for renovation coatings on UV parquet sealers. |
| WorléeKyd SD 6803 | 75% in dearomat. HC 160-200 | Low viscous, urethane alkyd resin for decorative and house paints, low VOC. Especially suitable as combination partner to improve drying, through drying and hardness. |
| WorléeKyd SD 7003 | 85% in deromat. HC 160-200 | Low viscous, air drying, long oil alkyd resin for the manufacture of decorative and house paints, low VOC. |
| WorléeKyd SD 8300 | 100 % | Low viscous, air drying, long oil alkyd resin for decorative and house paints, low VOC. Especially suitable as combination partner for other alkyd resins. |
| WorléeKyd SH 380 | 70 % in BAc 98/100 | Acid catalysed finishes, fast curing with good elasticity and resistance, sufficient potlife. NC-compatible, isocyanate-curable. |
| WorléeKyd SM 340 | 60 % in xylene | Fast drying primers and top coats, good elasticity, good resistance properties. |
| WorléeKyd SM 400 | 60% in xylene | Fast drying primers and paints with excellent durability. With amino resins reactive stoving enamels with good stability. "Laroflex" (BASF) compatibility. |
| WorléeKyd SM 426 | 60 % in xylene | Very fast drying alkyd resin for air and forced drying primers and top coats. |
| WorléeKyd SM 433 | 60 % in xylene | Fast drying primers and top coats, high solids, low thermoplasticity, partial "Laroflex" (BASF) compatibility. |
| WorléeKyd SO 554 | 55 % in isoparaffin. HC 170-200 | Fast drying, low odour, dearomatized machinery ind. and d.i.y. paints. |
| WorléeKyd T 735 | 60 % in xylene | Stoving primers and topcoats with medium reactivity and good mechanical properties. Curing conditions: 10 min./160°C or 30 min./130°C. |
| WorléeKyd T 7800 | 100 % | Low viscous, air drying, long oil alykd resin for house paints, glazings, d.i.y. and anticorrosive paints. |
| WorléeKyd TT 3502 | 80% in xylene | Low viscous, fast drying alkyd resin for low VOC industrial primers. |
| WorléeKyd V 162 | 55 % in ws 145-195/X | Extremely fast drying car refinishing, machinery and industrial paints with high gloss, good through drying. |
| WorléeKyd V 298 | 55 % in ws 135-175 | Fast drying primers, very good elasticity and durability, dilutable with white spirit. |
| WorléeKyd V 5241 U | ca. 100 % | Low viscous, oil modified polyurethane for high solid environmentally friendly coating systems. |
| WorléeKyd V 543 | 55 % in ws 145-195/X 55 % in ws 145-195 | Fast drying car refinishing, machinery and industrial paints with high gloss, good through drying. |
| WorléePaste S-AK 412 | flüssig | Solvent based pigment preparation for wood stain. Meko-free. |
| WorléePaste S-AK 512 | flüssig | Solvent based pigment preparation for wood stain. Meko-free. |
| WorléePaste S-AK 610 | flüssig | Solvent based pigment preparation for wood stain. Meko-free. |
| WorléePetroleumharz SK-120 | Flakes | Low molecular weight, non-polar, pale yellow thermoplastic resin. Kombination binder for industrial coatings , clear coats and alkyd varnish for temporary protection of metall surfaces by dipping or spraying. Very good soluble modifying resin for use in dark news inks. |
| WorléePetroleumharz SK-140 | Flakes | Low molecular weight, non-polar, pale yellow thermoplastic resin. Kombination binder for coldset inks. |
| WorléePetroleumharz SK-150 | - | Low molecular weight, non-polar, pale yellow thermoplastic resin. Modifying resin with improved solubility for cold / heatset inks. |
| WorléePol 1181/03 | 100 % | Saturated low viscous polyester resin, due to its wide compatibility suitable for various systems, e.g. as modifying component for solvent and water based isocyanate and amino resin crosslinking coatings to improve flexibility, flow, chemical and mechanical resistance and to increase solids content. Corresponds to FDA 175.300. |
| WorléePol 1181/09 | lösemittelfrei | Saturated low viscous polyester resin, due to its wide compatibility suitable for various systems, e.g. as modifying component for solvent and water based isocyanate and amino resin crosslinking coatings to improve flexibility, flow, chemical and mechanical resistance and to increase solids content. Excellent weather resistance. |
| WorléePol 165 | 100 % | W´Pol 165 is a low viscous and solvent free branched polyol with ester and ether groups and is mainly used for the formulation of solvent free coatings, sealings and adhesives in combination with modified polyisocyanates. |
| WorléePol 191 | 80 % in bg | Branched saturated polyester resin for waterborne industrial stoving systems. |
| WorléePol 194 | 45 % in water + bg (1%) | Branched saturated polyester resin for waterborne stoving primers, fillers and top coats with low voc. pH =7,5-8,5, very reactive |
| WorléePol 6631 | 67 % in methoxy propyl acetate | Saturated type for air drying 2 pack PU coatings. |
| WorléePol 6741 | 80 % in Bac | W´Pol 6741 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems. |
| WorléePol 6756 | 78 % in Bac | W´Pol 6756 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems for industrial and automotive repair paints with good mechanical properties and excellent chemical and weather resistance. |
| WorléePol 808 | 100% | High reactive polyester for stoving systems on aluminium foil. |
| WorléePol V 450 | 90 % in water | Similar to W´Pol 808 but higher reactivity, better stability, higher water tolerance and lower viscosity. |
| WorléePol VP E 1800 | 100 % | Solvent free, branched, saturated, hydroxyl-group-containing polyester resin, for flexible two-component polyurethane coatings for wood substrates, parquet and plastics. As sole binder with aromatic isocyanates it is used for anti-corrosive primers with excellent adhesion. |
| WorléePol VP E 1832 | 65% in Solvesso 150 / Butylglykol | Hydroxyl-group-containing, saturated polyester resin especially for baking coatings, can and coil coatings, top-coats and general industrial coatings with excellent weather and UV resistance. |
| WorléePol VP E 1870 | 80% in Butylacetat | Low branched, hydroxyl-group-containing, saturated polyester resin for air and forced drying, elastic high solid, two component polyurethane coatings. Recommended for industrial coatings, automotive repair and plastic coatings with good weather resistance and excellent low temperature flexibility. |
| WorléeQuartzsand AS 0104 schwarz / black | - | An epoxy resin coated, electrically conductive quartz. Can be used in the following binders: EP, PU, PMMA, UP; enables the formulation of conductive and antistatic coatings. |
| WorléeQuartzsand AS 0408 schwarz / black | - | An epoxy resin coated, electrically conductive quartz. Can be used in the following binders: EP, PU, PMMA, UP; enables the formulation of conductive and antistatic coatings. |
| WorléeSin GM 201 | 100 % | General purpose resin for modification of oil, alkyds and paints based up on them. As a cold cut or to be polymerised with oils and alkyds. |
| WorléeSin GM 203 | 100 % | General purpose resin for oil and alkyd based paints and for NC-lacquers. For modification of oil and paints based up on them. As a cold cut or to be polymerised with oils and alkyds. |
| WorléeSin MK 223 | 100 % | With castor oil plasticized, for NC-lacquers with very good solvent release and sandability. |
| WorléeSin MS 265 | 100 % | For alcohol and water based paints and lacquers, flexo and gravure inks, overprint varnishes. Compatible with acrylic polymers and NC. Soluble in water after neutralization. |
| WorléeSin PM 200 | 100 % | Low viscosity penta esterified resin for gloss improvement for house and industrial paints and dispersing media for pigment pastes and preparations. |
| WorléeSin PM 202 | 100 % | Penta esterified general purpose resin for decorative, do-it-yourself and industrial paints. Also used for furniture adhesives. |
| WorléeSoft 1035 | 35% in water | Special developed water based soft-touch polyurethane dispersion; with exceptional physical properties in abrasion resistance, flexibility and water resistance; it can be used as a sole binder or in combination with acrylates and polyurethane dispersions. |
| WorléeSol 07 A | 75 % in bg/sec. butanol 1:1 | Air drying and low bake industrial primers and topcoats. Low viscous, very fast dust free drying, early water resistance. |
| WorléeSol 30 | 100 % | Water soluble modified linseed oil type. Readily reducible with water, for printing inks, as additive for latex paints, tinting and artist colours and pigment pastes. |
| WorléeSol 31 A 31 C | 45 % in water/bg 80:20(31 A) 45 % in water/PnB 80:20 (31 C) | Water dispersible linseed oil polymer. Readily reducible with water for in- and outdoor stains and wood preservatives. Extremely good penetration and outdoor resistance. |
| WorléeSol 37 C | 59% in water /propylenglycol-n-butylether 80:20 | Modified linseed oil polymer for wood protection systems. Excellent penetration and weather resistance on different woods and long term elasticity. |
| WorléeSol 61 A, 61 E, 61 F, 61 P | 75 % in bg/sec. butanol 1:1 (61 A) 75 % in ethoxy propanol (61 E) 70% in Dowanol PnB (61 F) 60% in wasser/butyl glycol/sec. butanol 2:1:1 (61 P) | Air and forced drying industrial base and top coats, very fasr drying, excellent anticorrosion resistance. |
| WorléeSol 65 A, 65 E | 70 % in bg/sec. butanol/Dowanol PnB 70 % in ethoxipropanol | Air drying and low bake industrial primers and topcoats, very fast drying, early water resistance, suitable for agricultural machinery paints. |
| WorléeSol 68 A | 75 % in bg | Silicone modified alkyd resin for air drying and stoving systems with excellent weather, heat and humidity resistance. |
| WorléeSol 84 C | 44 % in water/BG (1,0 %) (DMEA-neutr.) | For waterborne stov. systems, high gloss, good mech-anical properties, total cosolvent content < 1 %. |
| WorléeSol 85 A | 43 % in water/bg 5,5 % (DMEA-neutr.) | For waterborne stov. systems, high gloss, good mechanical properties, total cosolvent content < 1%. More reactive than W´Sol 84. |
| WorléeSol E 150 W | 40% in water | Medium oil alkyd emulsion for high gloss decorative and diy paints. |
| WorléeSol E 330 W | 42% in water | Short oil alkyd emulsion for drier-free based anticorrosive primers and top coats. |
| WorléeSol E 530 W | 30% in water | W´Sol E 530 W is mainly used for the production of water dilutable fast drying paint systems for wood and metal. Due to the fast physically and oxidative driyng cobalt drier is not necessary in many cases. Varnishe based on W´Sol E 530 W show a good wood firing, good water and chemical resistance and high abrasion resistance. |
| WorléeSol NW 410 | 46% in water | Solvent free medium oil special modified alkyd emulsion for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. For high gloss top coats and wood protection stains. |
| WorléeSol NW 474 | 60% in water | Amine and co-solvent free alkyd emulsion for wood impregnations and wood protecting paints. Also suitable as a cobinder to improve open time and filling properties of decorative paints. |
| WorléeSol SE 420 W | 40 % in water | Medium oil silicone modified alkyd emulsion for high gloss paint systems (also decorative) with excellent outdoor resistance. |
| WorléeThix 670 hs | 70 % in deraomat. HC 160-220 70% in dearomat. HC 160-200 | Thixotropic long oil alkyd for primers, fillers, gloss and silk gloss coatings. low VOC. |
| WorléeThix A 1420 | 50 % in Bac | Thixotropic, hydroxyfunctional pure acrylate for 2 component finishing lacquers. |
| WorléeThix A 2125 | 50 % in xylene | Thixotropic styrene acrylic for thick layer coatings and textured finishes. |
| WorléeThix A 2126 | 60% in xylene 60% in 1-methoxy-2-propyl acetate 60% in butyl acetate | Thixotropic, isocyanate cross-linkable acrylic resin |
| WorléeThix A 2242 W | 58% in water / BAc / EEP | Thixotropic water thinnable hydroxy acrylate for formulating high quality 2 component structure paints. As combination partner in aqueous 2 component top coats for improving antisagging properties. |
| WorléeThix A 2313 | 60 % in aromat. hc 155-180 | Thixotropic acrylic resin which can be crosslinked with isocyanates for air and forced drying industrial paints. |
| WorléeThix D 46 | 50 % in xylene | Thixotropic epoxy ester, air and oven drying, for primers, industrial and top coats, zinc dust coatings. Thixotropy is not fully degraded by temperature and polar substances. |
| WorléeThix L 7904 | 94% in xylene | Low viscous, thixotropic, long oil alkyd resin for fillers and putties and for modifying oil paints. Excellent weather resistance and permanent elasticity. |
| WorléeThix L 8050 | 100 % | Thixotropic, long oil alkd resin, mostly used for wood glazings. Useable as sole binder as well. |
| WorléeThix MH 439 | 60% in xylene | Thixotropic short oil alkyd for fast drying primers, topcoats and textured finishes. Temperature and polar solvent resistant. |
| WorléeThix S 2655 | 60 % in xylene | Thixotropic fast drying short oil alkyd for primers, top and textured finishes, thick layer- and stoving systems. Thixotropy is not fully degraded by temperature and polar substances. |
| WorléeThix S 6357 | 40 % in ws 180-210 40 % in dearomat. HC 180-220 | Thixotropic long oil alkyd resin. Combination resin for house paints, wood stains/thicklayer. Thixotropy is not fully degraded by temperature and polar substances. |
| WorléeThix S 6358 | 50% in dearomat. HC 180-220 | Pumpable thixotropic long oil alkyd combination resin for building paints, wood glazings, thick layer. Thixotropy is not totally degradable by temperature and polar solvents. |
| WorléeThix S 6455 | 50 % in ws 145-195 | Strong thixotropic long oil alkyd for thick layer coatings, wood protection and clear coatings. Temperature stable and resistant against polar solvents. |
| WorléeThix SD 6051 | 55 % in dearomat. HC 160-200 55 % in dearomat. HC 180-220 | Thixotropic long oil alkyd for primers, mat wall and silk gloss paints and thixotropic glossy decorative and protective house paints. As V 747, but with improved resistance against polar substances. |
| WorléeThix V 727 | 52 % in ws 180-210 52 % in isoparaffin. HC 170-200 52 % in dearomat. HC 180-220 | Thixotropic long oil alkyd for semi gloss house paints, primers, wood stains and anticorrosive paints. |
| WorléeThix V 747 | 52 % in isoparaffin. HC 170-200 52 % in dearomat. HC 180-220 | Thixotropic long oil alkyd for primers, mat wall and silk gloss paints and thixotropic glossy decorative and protective house paints. |
| WorléeThix V 800 | 50 % in entaromat. HC 160-200 40 % in isoparaffin. HC 170-200 | Thixotropic, urethane modified long oil alkyd for thick layer coatings, wood stains and lacquers. Temperature stable and resistant against polar solvents. |
| WorléeTransoxid S red | flüssig | Transparent, solventbased iron oxide preparation for Wood stain. Meko-free. |
| WorléeTransoxid S yellow | flüssig | Transparente, solventbased iron oxide preparation for wood stains. Meko-free. |
| WorléeTransoxid SF-AK Red | flüssig | Transparent iron oxide preparations based on solvent-free binders for wood stains, MeKo-free. |
| WorléeTransoxid SF-AK Yellow | flüssig | Transparent iron oxide preparations based on solvent-free binders for wood stains, MeKo-free. |
| WorléeTransoxid W red | flüssig | Transparent, waterbased iron oxide preparation for wood stains. |
| WorléeTransoxid W yellow | flüssig | Transparent, waterbased iron oxide preparation for wood stains. |
| WorléeWhitepaste S | flüssig | Transparent, solvent based titanium dioxide preparation for Wood stain. Meko-frei. |
| XenCure A43 | liquid | Amino-functional Q-T polysiloxane resin; as crosslinker, adhesion promoter and toughness modifier, improves adhesion on metal and mineral substrates, increases the characteristics, can be used in a variety of applications, e.g. in coatings, adhesives, sealants, rubbers, elastomers, thermoplastic hotmelts. |
| XenLink AO352 | liquid | Amino- and octyl-functional Q-T polysiloxane resin; as crosslinker, adhesion promoter and toughness modifier, improves adhesion on metal and mineral substrates, increases the characteristics, can be used in a variety of applications, e.g. in coatings, adhesives, sealants, rubbers, elastomers, thermoplastic hotmelts. |
| XenSlick O35 | liquid | Octyl-functional Q-T polysiloxane resin, as an additive in coatings, lacquers and varnishes to enhance scratch resistance, impact toughness, surface quality (gloss, smoothness), for thermoplastic hotmelts, hydrophobisation of cement, methanol-free. |
| Zinpol 146 | 35 % in water | Binder for gold and silver inks with good printability at higher printing speed. |
| Zinpol 295 | 49 % in water | Pure acrylic polymer with superior adhesion to non porous substrates and excellent ice-water-crinkle resistance. |